Tektronix 2200 Manual Do Utilizador
2-29
Software Setup
Mapping Crosspoints
Use the Map Inputs Menu to define the format for each video or
key input.
key input.
NOTE:
This function is applied to a key input only if the external key
is being used with video or superblack.
From the Inputs Menu, press the
MAP INPUTS >
button to select the
Map Inputs Menu.
1.
With the
VIDEO/KEY FMT
, button, select
UNSHAPED VIDEO
or
SHAPED
VIDEO
. Inputs should be set for
UNSHAPED VIDEO
unless
otherwise required.
2.
With the
LOG/PHYS ASSIGNMENT
button, select
PHYS INPUTS.
3.
Press the crosspoint button on the PST bus that you want to
map. (All crosspoints in that vertical column will have the
same inputs.)
map. (All crosspoints in that vertical column will have the
same inputs.)
MAP INPUTS MENU
SHAPED
VIDEO
config/inputs/map inputs
VIDEO/
KEY FMT
CHROMA KEY INPUT
= NONE
(INTERNAL)
VIDEO INPUT
= 4
(DIG SER/RGB/SETUP)
KEY INPUT
= 1
(DIG SER/8 BIT/SETUP/SYNC)
NAME XPT
BUTTON >
LOG/PHYS
ASSIGNMENT
UNSHAPED
VIDEO
38
(SHIFT-14)
LOG CHANNEL
PHYS CHANNEL
XPT BUTTON
NUMBER
XPT BUTTON
NAME
Use the Preset Bus to select button number.