Tektronix 2200 Manual Do Utilizador
2-59
Software Setup
3.
Select
LOG CHANNEL
with the
LOG/PHYS ASSIGNMENT
button.
4.
Rotate the
VIDEO INPUT
knob to assign the desired DPM number
and logical channel for this crosspoint. For example, assign
logical channel 1 of DPM 1 by selecting
logical channel 1 of DPM 1 by selecting
DPM 1 LOG CHAN 1
.
5.
Rotate the
KEY INPUT
knob to assign the desired DPM number
and logical channel for this crosspoint. For example, assign
logical channel 1 of DPM 1 by selecting
logical channel 1 of DPM 1 by selecting
DPM 1 LOG CHAN 1.
6.
Press the top level
CONFG
button to return to the
Configuration Menu.
Configuring the Peripheral Interface
Use the Peripheral I/F Menu to set the Baud, Parity and
Peripheral Trigger parameters for the switcher peripheral port,
PORT A3, on the Expanded Communication Module.
Peripheral Trigger parameters for the switcher peripheral port,
PORT A3, on the Expanded Communication Module.
MAP INPUTS MENU
SHAPED
VIDEO
config/inputs/map inputs
VIDEO/
KEY FMT
CHROMA KEY INPUT
= NONE
(INTERNAL)
VIDEO INPUT
= 4
(DIG SER/RGB/SETUP)
KEY INPUT
= 1
(DIG SER/8 BIT/SETUP/SYNC)
NAME XPT
BUTTON >
LOG/PHYS
ASSIGNMENT
UNSHAPED
VIDEO
38
(SHIFT-14)
LOG CHANNEL
PHYS CHANNEL
XPT BUTTON
NUMBER
XPT BUTTON
NAME
Use the Preset Bus to select button number.