Adtran 1442880G1 Manual Do Utilizador

DESCRIPTION

The Small Form-Factor Pluggable (SFP) 3.125 Gigabit 

Ethernet is a single mode fiber SFP that plugs into a 

module designed to accept SFPs. The SFP provides a 

dual optical interface to the 3.125 Gigabit Ethernet 

physical interface. Installed into an appropriate module, 

the SFP provides 3.125 Gigabit Ethernet tributary 

interface to the supporting system.

The following features are supported on the SFP:

♦

3.125 Gigabit Ethernet data rate

♦

1550nm Transmitter

♦

Wavelength: 1550nm

♦

Optical distance: 80 km maximum

Operational Specifications

♦

Optical Specifications:
– Optical transmit level: 0 dBm to 5 dBm 
– Optical receive level: 25 dBm to 9 dBm
– Optical connectors: LC
– SFF 8472 Digital diagnostic compliant
– Compatible with SFP MSA

♦

Extended Environmental Support:
– Operational temperature range: –40°C to +85°C
– Storage temperature range: –40°C to +85°C
– Relative humidity to 95%, noncondensing

INSTALLATION

To install the SFP into an appropriate module, complete 

the following steps:

1. Inspect the SFP. If damaged, file a claim with the 

carrier and then contact ADTRAN Customer Service.

2. Do not remove the protective end cap from the SFP 

until the fiber optic cable is ready to be connected.

3. Insert the SFP into the SFP cage on the module. 

Ensure the manufacturer’s label on the SFP is facing 

upward for correct installation.

4. Slide the SFP all the way into the receptacle until 

there is an audible “click”.