Adam Equipment abk 8 Manual Do Utilizador
20
|
P a g e
© Adam Equipment Company 2011
comparison to the capacity of the system. A smaller weight will show
only “
only “
100%
” while a larger weight might show “
100.00%
”.
•
If the scale was showing zero weight when entering this function, then
the user must manually enter the weight to be set as 100% as
described below.
described below.
•
Press the [Z/T] key. “
P1 PCt
” will be displayed.
•
Press [Z/T] again to enter percent weighing. The scale will now accept
a value the user enters as the reference weight.
•
Enter the value using the [Unit/
] key and [Pcs/ ] key to set the
values of the 100% mass.
•
When set press the [Z/T] key to store the value. The display will show
“
0.00 %
”.
•
The weight entered must be greater than 50 scale divisions.
•
Press [Unit/
] to return to weighing.
NOTE:
The display may jump by large numbers unexpectedly if small weights are
used to set as 100% reference. The scale checks if the weight is too small
and will show Error 7.