Sun Microsystems storagetek vsm gui Manual Do Utilizador

312651601 • Rev A

Chapter 2 Installing and Configuring the VSM GUI 23

cgionly yes|no

Only allow CGI processing, default is no. Caution that this parameter MUST NOT be 

set to yes if using any GUI application as it will disable the GUI.

Sets the request timeout (in seconds) on a client connection. The allowed range is 5 

to 60 seconds, default is 30 seconds.

Specifies the period after which browser cookies expire.

dirlists yes|no

Enables generation of virtual directory listings, default is yes.

deny xxx.xxx.xxx.xxx / mm

Specifies the ip address range forbidden to connect to the server.   Syntax as for 

allow.

execcgi yes|no

Specifies if CGI functions can run and should be left as yes. Defaults to yes.

Specifies the default static content expiry period in seconds. Default is 21600 (six 

hours).

Specifies the default home page for the server and is relative to the document root. 

For example:

home 

/vsm/en/home/index.html

For multihomed hosts, specifies the IP address of the network interface on which the 

server is to listen.

Keepalive yes|no

Enable persistent connections. Default is yes.

Sets the inactivity timeout (in seconds) on a persistent client connection. The allowed 

range is 15 to 300 seconds. Default is 300 seconds.

Sets the socket timeout (in seconds) on close before it is available for reuse. It can 

tuned to improve socket availability at high transaction rates but setting too low can 

cause connections to be disconnected before all data is delivered to the client. The 

default is the installation TCP/IP default.