Ericsson bs120 Manual Do Utilizador

2. Two dashes are displayed.

3. Enter 42.

The current call barring status is displayed 
(0 = off, 1 = on).

4. Enter a digit to switch call barring on or off:

‘0’ to switch call barring off

‘1’ to switch call barring on

5. Press   and then press  .

You have now set call barring on or off.

You can enter three numbers of up to 8 digits with 
the sequence numbers 1, 2 and 3 for call barring. You 
can also record the prefix of numbers to be barred, for 
instance the prefix of chat lines and other expensive 
services, or the prefix for international numbers. All 
calls to numbers with this prefix will be barred.

1. Press   and then press the R key for 2 seconds.

Four dashes are displayed.

2. Enter the PIN code for the home base station 

(default is 1111).
Two dashes are displayed.

3. Enter 65.

The sequence number 1 appears on the left of the 
display. You will also see a dash or a previously 
set number or prefix.

4. Press the Up or Down key, once or more, to 

choose another sequence number if required.

5. Enter the number or the prefix.

Use the C key to delete the last digit if needed.

6. You can press the Up or Down key, once or more, 

to record another prefix or number.

7. Press   and then press  .

The numbers set are now barred.

You can exempt up to ten telephone numbers, for 
example emergency numbers, from call barring by 
the home base station. This means that these numbers 
can always be dialled. Each of the exempted numbers 
has a sequence number (0 - 9).

1. Press   and then press the R key for 2 seconds.

Four dashes are displayed.