Savin RCP40 Manual Do Utilizador

Network Settings

15

-

-

-

-About addresses

❖

❖

❖

❖ Subnet mask

Mask value for using one part of an IP Address as a network address.

❖

❖

❖

❖ Default gateway address

Host or router address used as a gateway when negotiating with (printing, in-
formation gathering) a workstation on a different network.

❒ Check with your network administrator for the address to be set.
❒ If you do not know the address to be set, use the factory settings.

-

-

-

-About access control

The access control address and the access control mask are used to limit a print-
able workstation, by using an IP address. If it is not necessary to limit printing,
set “0.0.0.0”.

❒ If the access control address mask and the mask of the address of the work-

station trying to print is the same, then access will be granted.

❒ For example, if the access control address is set to 192.168.15.16, depending

on the mask value, the address of the accessible workstation is as follows:
(XXX can be any value).