Airlink101 AGIGA32PCI Manual Do Utilizador
Ver. 2A
Package Content:
• 32-bit PCI Gigabit Ethernet
• 32-bit PCI Gigabit Ethernet
Card
• Driver Disk
• Driver Disk
• Quick Installation Guide
1
Model # AGIGA32PCI
Section 1
Installing Hardware
Step 1
Shut down the computer, unplug its power cord, and remove the chassis
cover.
Step 2
Insert the Ethernet card into a PCI slot on the computer and secure it with
a chassis screw.
Step 3
Cover the computer’s chassis.
Step 4
Connect an Ethernet cable to the RJ-45 port of the Ethernet card.
Step 5
Re-plug the power cord and turn on the computer.
Section 2
Installing Driver
Note: The following steps and screen shots are for
Windows XP. Steps for other Windows operating
systems will be noted beneath each screen shot.
Windows XP. Steps for other Windows operating
systems will be noted beneath each screen shot.
Step 1
At the Found New Hardware Wizard, select Install from a list or
specific location (Advanced) and click Next.
Windows 2000: Click Next at the Found New Hardware Wizard. Select
Search for a suitable driver for my device (recommended) and click Next.
Search for a suitable driver for my device (recommended) and click Next.
Windows ME: Click Next at the Add New Hardware Wizard. Select Specify
the location of the driver (Advanced) and click Next.
the location of the driver (Advanced) and click Next.
Windows 98SE: Click Next at the Add New Hardware Wizard. Select Search
for the best driver for your device (Recommended) and click Next.
for the best driver for your device (Recommended) and click Next.
10/100/1000Mbps PCI Adapter
Quick Installation Guide