Adam Equipment cbda Manual Do Utilizador

 

P bAU d 

b     600 
b   1200 
b   2400 
b   4800 
b   9600 

Sets the required baud  
rate (speed for the RS-
232 communications).  
Default rate is 4800. 
 

 

PAritY 

8   n  1 
7    E  1 
7   o   1 

8 data bits, no parity 

 

7 data bits, even parity 

 

7 data bits, odd parity 

U  id 

“U id”   
“    Abc234”    
“      “   

Shows the current user ID (if any). 
Enter a new User ID as described in the Description 
under the PLU section. The ID can be alpha-
numeric but is limited to 6 characters.

 

SC id 

“Sc id”   
“    Abc234”    
“      “ 

Shows the current scale ID (if any). 
Enter a new Scale ID as described in the 
Description under the PLU section. The ID can be 
alpha-numeric but is limited to 6 characters.

 

tECH  

Allows access to the Technical parameters using a 
password. Not normally accessed by user.

 

 
 
 

  

 

 

•  The scales can be operated using the battery. The battery life is 

approximately 70 hours if only the basic unit is used. If a second 
platform is used the battery life will be reduced. 

 

•  When the battery needs charging the arrow above the low 

battery symbol under the “Weight” display will turn on. The 
battery should be charged as soon as the arrow above the 
symbol is on. The scale will still operate for about 10 hours after 
which it will automatically switch off to protect the battery. 

 

•  To charge the battery simply plug into the mains power. The 

scale need not to be turned on. 

 

•  The battery should be charged for 12 hours for full capacity. 

 

•  Just under the “Count” display is an LED to indicate the status 

of battery charging.  When the scale is plugged into the main 
power the internal battery will be charged.  If the LED is green 

 

24