Senco SCN56 Manual Do Utilizador

Fastening Solutions

™

Applications:

Features and Benefits:

Tool Specifications:

Fastener Specifications:

The SCN56 is a superior siding tool that drives full round head nails

from 1-7/8” to 2-1/2” in length and from .092 to .099 nail shank

diameter. The SCN56 is a lightweight, rugged and dependable

multi-purpose coil Nailer. The SCN56 coil Nailer has a unique mode of

operation. The SCN56 allows the operator to select either a dual action

or restrictive mode of fastening by simply switching the trigger – No

need to change parts!

Item #: 990001N - Switchable triggering system
Tool Weight: (Unloaded) 6 lbs. (2.73 kg)
Height: 12" (270 mm)
Length: 12-1/2" (280 mm)
Collation: Wire weld coil
Mode of Operation: Switchable triggering system –either sequential

or contact actuation trigger mechanism.
Hose Fitting: 1 ⁄4 " NPT

Siding, exterior decks, decking, exterior trim, fencing, subflooring,

wood shingles, crate and box assembly and floor sheathing.

• Switchable trigger — Allows the operator to select the fastening

mode (Dual action or restrictive)

• Dual collation — Allows the choice between wire weld and SENCO

plastic sheet collation. (Plastic sheet collation is limited to direct

industrial customers at this time.)

• Adjustable depth of drive — Allows for consistent and controllable

drive

• Comfort grip — Reduces operator fatigue

• Adjustable exhaust deflector — Direct air in a variety of directions

• Detachable no-mar pad — Protects work surfaces

• Fastener Range — 1-7/8"—2-1/2"

• Light weight — 5.8 lb

• High load capacity — Holds up to 350 nails

SCN56

Medium Coil Nailer

For additional information on how SENCO Power Fastening Systems

will save you time, reduce costs, and increase quality, call our toll-free

Action Line: 1-800-543-4596 to find your nearest Authorized Senco

Dealer or Distributor . Visit our web site at: www.senco.com

Drives full round head nails from 1-7/8" — 2-1/2" in length and from

.092 — .099 nail shank diameter.

Sequential Actuation Trigger (also known as restrictive trigger or

trigger fire) operates in the following a sequence - depress the safety

element at the nose of tool against the work surface then pull the trigger.

After each fastener is driven, release the trigger and lift the tool off the

work surface before starting the sequence again. This trigger is

recommended and acceptable for most applications.

Contact Actuation Trigger (also known as dual action, bounce or

bottom fire) operates in the following sequence- pull the trigger first and

keep the trigger pulled while moving the tool along the work surface

with a bouncing motion, depressing the safety element at the nose of

the tool against the work surface where the fastener is to be driven. This

trigger is recommended for use by trained professionals only in high

production or volume applications.

Always read the Operators Manual and Safety Instructions with all tools

to ensure proper use and safety precautions or log on to

www.senco.com or call 1-800-543-4596 for more information on

SENCO’s trigger systems. Choose the right trigger system for your

specific needs!

EL (.0915)

ED (.0915)

BK (.099)

BE (.099)

LLROUND

H EAD