Sanyo plc-xl40 Manual Do Utilizador

To store the adjusted data, select Store and press the
SELECT button. Select a level from Image 1 to 4 with the
Point 

ed

buttons and press the SELECT button. A

confirmation box appears and then select “Yes.”
Stored data can be called up by selecting “Image” in the
Image Level Selection on page 38.

Image Level Menu
Move the red frame pointer to
an image item to be set and
then press the SELECT button.

To reset the adjusted data, select Reset and press the
SELECT button. A confirmation box appears and then select
“Yes.” All adjustments return to their previous figures.

Exit the Image Adjust Menu.

✔

Store
item

An interlaced video signal can be displayed in a progressive
picture. Select one of the following options.

Off.......... Disabled.
L1........... For an active picture.
L2........... For a still picture.
Film ........ For watching a film. 

With this 

function, the

projector reproduces pictures faithful to the
original film quality.

Noise interference on the screen can be reduced. Select
one of the following options to get smoother images.

Off.......... disabled.
L1........... lower reduction 
L2........... higher reduction

A confirmation box
appears and then
select “Yes.”

Use the Point 

7 8

buttons to adjust the gamma value to get

better balance of contrast (from 0 to 15).

Press the Point 

7

button to decrease the sharpness of the

better balance of contrast (f.6(3 qualitS.0772 Tw260.77 2.9825 TD-0.000227.59Gamma)TjET0 0 0 0 k56.69 695.62 18.43 -78.42 ref/EmbeddedDo27.59Gamma