Sanyo plc-xl40 Manual Do Utilizador
6
Safety Instructions
Moving the Projector
When moving the projector, replace the lens cover and
retract the adjustable feet to prevent damage to the
lens and cabinet. When the projector is not in use for
an extended period, put it into a suitable case.
Care must be taken when handling the projector; do not
drop, bump, subject it to strong forces, or put other
things on the cabinet.
retract the adjustable feet to prevent damage to the
lens and cabinet. When the projector is not in use for
an extended period, put it into a suitable case.
Care must be taken when handling the projector; do not
drop, bump, subject it to strong forces, or put other
things on the cabinet.
Do not tilt the projector more than
20 degrees from side to side.
20 degrees from side to side.
Do not point the projector up to
project an image.
project an image.
Do not point the projector down
to project an image.
to project an image.
Do not put the projector on either
side to project an image.
side to project an image.
Install the projector properly. Improper Installation may
reduce the lamp life and cause fire hazard.
reduce the lamp life and cause fire hazard.
Installing the Projector in Proper Position
Openings in the cabinet are provided for ventilation. To
ensure reliable operation of the product and to protect it
from overheating, these openings must not be blocked
or covered.
ensure reliable operation of the product and to protect it
from overheating, these openings must not be blocked
or covered.
Air Circulation
20˚
20˚
Air Intake
Vent
Vent
Exhaust Vent
(Hot air exhaust)
(Hot air exhaust)