Sharp lc-70ud1u Manual Do Utilizador

On-Screen Display Menu

Manual Update

Select the method for manually updating the 
software.

USB Update: Updates the software using a USB 

memory device containing the update fi le. (See 
"Updating the Software with a USB Memory 
Device".)

Network Update: Downloads the update fi le via 

the network and then updates the software. (See 
page 29.)

NOTE

•  You cannot update the software using a SD memory 

card containing the update fi le.

•  A broadband connection and Internet Setup are 

required to update the software using the network. (See 
pages 43 to 44.)

•  It may take time to access and download the update 

depending on the Internet connection and other 
factors.

 

■ Updating the Software with a USB Memory 

Device

To check for the availability of a software update, visit
http://www.sharpusa.com/products/support/. If you 
have any questions, please
call 1-800-BE-SHARP (800-237-4277).

CAUTION

•  Do not remove the USB memory device or unplug 

the AC cord while the software is being updated.

•  Be sure to properly follow the whole procedure 

described below, step by step. Otherwise, for 
example, the TV cannot read the data in the USB 
memory device and software updating will fail.

1

  Insert the USB memory device with the update 

fi le into the USB 1 or USB 2 terminal on the TV.

•  When you update the software, use only one USB 

terminal. Either USB 1 or USB 2 is usable.

or

2

 Press 

a/b on the Manual Update screen to 

select "USB Update", and then press ENTER.

3

 Press 

ENTER to start checking the data in the 

USB memory device.

Insert the USB memory device 

containing the software update file.

OK

4

  During the data checking, "Checking" blinks.

Now checking the data 

in the USB memory device.

Checking

•  The current version of the TV software and the 

version of the update fi le on the USB memory 
device are displayed. 

      Example

Software update file is detected 

in the USB memory device.

Start update?

No

Yes

Current Version                  :  UXXXXXX1
Update Version                  :  UXXXXXX2

•  If the USB memory device is not properly installed 

or the correct update fi le cannot be found on 
the USB memory device, an error message is 
displayed.
Check the fi le on the USB memory device, and 
then reinsert the USB memory device correctly.

Software update file is not detected in the USB memory device.

Confirm that you have transferred the file

to the USB memory device and retry software update.

OK

There is more than one software file in the USB memory device.

Confirm that only the software update file is 

in the USB memory device.

OK

5

  To update the TV software with the update fi le, 

select "Yes", and then press ENTER.

Software update file is detected 

in the USB memory device.

Start update?

No

Yes

Current Version                  :  UXXXXXX1
Update Version                  :  UXXXXXX2

    

    Example

30%

Now updating

Update Version                  :  UXXXXXX2

Do not unplug AC cord.

Remote Control operation is disabled during updating process.

CAUTION

•  Do not remove the USB memory device or unplug 

the AC cord while the software is being updated.

6

  When the software is successfully updated, a 

screen is displayed indicating that the update 
process is completed.

 

After this screen is displayed, the TV 
automatically turns off and then turns on again.

     Example

Software Update is complete.

OK

Update Version                  :  UXXXXXX2

•  If the update has failed, check the fi le in the USB 

memory device and try Software Update again.

Failed to complete update.

Retry Software Update.

If system update fails again,

contact the customer service center.

OK

Update Version                  :  UXXXXXX2

7

  After the screen shown below is displayed, press 

ENTER.

System software has been

updated successfully.

Remove the USB memory device.

Update Version: UXXXXXX2

OK

8

  Remove the USB memory device.

LC-70UD1U_E.indd   28

2013/07/03   15:30:17