Acura 2011 mdx Manual Do Utilizador

Página de 184
Navigation System
119
System Setup
Switching Display Mode Automatically
I
Recommended Display Mode Day/Night Settings:
• With the headlights on, select mid-range for the dash illumination (see your Owner’s Manual for location of buttons).
• With the headlights off, select mid-range for the dash illumination (see your Owner’s Manual for location of buttons).
• On the SETUP Color adjustment screen, choose white for the map 
Day
 display and black for the map
 Night
 display (see 
page
). Inappropriate adjustment of these colors can cause the 
Day
/
Night
 modes to appear inoperative. 
llumination control
Priority Operation
But remember
Display Mode
 button 
 
(see page
1
Allows selection of 
Day
Night
, or 
Off
 display 
mode. This button has the highest priority and 
overrides all other display control adjustments 
listed below.
Once you press this button, you assume full 
manual control of the display mode until the 
ignition key is cycled again.
Sunlight sensor (middle of 
dash near the windshield, see 
your Owner’s Manual for 
location)
2
If the sunlight sensor detects daylight and the 
headlights are turned on, the system 
automatically overrides (cancels) the 
Night
 
display and displays the 
Day
 display mode.
If desired, use the
 
Display Mode
 button 
 to override this automatic choice.
Dash illumination adjustment 
buttons (see the vehicle 
Owner’s manual for location)
3
When headlights are turned on, and you wish to 
have the 
Day
 display mode, then adjust the 
illumination to the full bright setting (beeps).
Adjust the dash brightness back to mid-range 
to allow auto switching by sensing the 
headlights are on or off.
Headlights (Auto/On/Off)
4
When turned on, the display changes to 
Night
 
display mode. The previous three controls 
listed above can “cancel” this function.
Use the
 
Display Mode
 button 
, or 
adjust the dash illumination to full bright to set 
the display to your desired choice.
Map 
Day
/
Night
 screen color 
choice (see page
 for the 
Day
 and 
Night
 color choices)
N/A
The user can select the color of the screen that 
will be displayed for the 
Day
 and
 Night
 
display modes described above.
For best contrast, ensure that the map color is 
white for 
Day
 and black for 
Night
.
2011 MDX