Smeg wm62121 Manual Do Utilizador

187348

•

 Be sure to remove transport brackets prior first use of the appliance. Attempted 

operation of the blocked machine may result in irreparable damage which is not 

covered by the manufacturer’s warranty!

•

 When connecting your washing machine to water supply, be sure to use brand 

new water inlet hose and appropriate sealing gaskets (attached).

•

 Do not locate the machine in a room with temperature below 0°C. Parts of the 

machine may be damaged if frozen.

•

 Install the washing machine in a perfectly horizontal position, on solid flat 

concrete floor.

•

 Follow the instructions for correct installation and water and mains 

connections.

•

 Never immerse the end of the drain hose into the draining water.

•

 Prior starting the washing cycle lock the door by pressing them at the designed 

spot.

•

 Door may not be open during the washing cycle.

•

 Use only detergents and softeners for machine wash. Manufacturer may not 

assume responsibility for any damage and eventual discoloring of gaskets 

and plastic components as a consequence of incorrect use of bleach and/or 

coloring agents.

•

 For removal of lime residues use such agents with added anti-corrosion 

agents. Follow the manufacturer’s instructions. Finish the lime removal by 

multiple rinsing to remove completely eventual acid residues.

•

 Never use detergents containing solvents, since there is a danger of creating 

toxic gasses which may damage the machine and result in ignition or 

explosion. 

•

 Upon completion of washing operation close the water faucet.

•

 Before any transport block the machine by inserting at least one transport 

blocking rod. Prior this operation disconnect the appliance from the mains 

power!

•

 Rating plate with basic information is located above the opening of the 

machine.

•

 The warranty shall not apply to consumables (bulbs), minor discoloration or 

deviations of color, increased noise level as a consequence of appliance age, 

which does not affect appliance functionality, and aesthetical deficiencies 

which do not affect appliance functionality or safety.

4