Epson EB-G5650W Manual Do Utilizador

You  can  select  the  aspect  mode  according  to  the  type  of  input  signal,  ratio
of  height  and  width,  and  resolution  to  switch  the  Aspect   Ratio

 of  the

projected  image.  The  aspect  modes  are  listed  below.  The  aspect  modes  that
can  be  set  depend  on  the  type  of  image  that  is  being  projected.

Aspect mode

Explanation

Projects to the full projection size retaining the aspect
ratio of the input image.

Projects in an appropriate aspect ratio based on
information from the signal being input.

Projects to the full projection size at an Aspect of 4:3.
This is ideal for when you want to project images at an
aspect of 5:4 (1280 x 1024) to the full projection size.

Projects at a 16:9 aspect ratio. This is ideal for projecting
at full screen size when using a 16:9 screen.

Projects at the resolution of the input image size to the
center of the screen. This is ideal for projecting clear
images.
If the image resolution exceeds the panel resolution
(1024 x 768) of the projector, the edges of the image are
not projected.

Aspect mode

Explanation

Projects to the full projection size retaining the aspect
ratio of the input image.

Projects in an appropriate aspect ratio based on
information from the signal being input.

Projects to the full projection size at an aspect ratio of
16:9.

Project at full size.

Aspect mode

Explanation

Projects the input image enlarged to the full lateral
direction size as the aspect ratio remains. Parts that
extend beyond the projection size are not projected.

Projects at the resolution of the input image size to the
center of the screen. This is ideal for projecting clear
images.
If the image resolution exceeds the panel resolution
(1200 x 800) of the projector, the edges of the image are
not projected.

Remote Control

The  aspect  mode  name  is  displayed  on  the  screen  by  pressing  the  button.
If  you  press  the  button  while  the  aspect  mode  name  is  displayed  on  the
screen,  it  changes  to  the  next  aspect  mode.

q

The  aspect  mode  can  also  be  set  using  Aspect  in  the  Signal  menu
from  the  configuration  menu.  s