Saris 522 Manual Do Utilizador

Place lanyard
ring around
sleeve.  Insert
final bolt into
receiver base,
through sleeve
and out through
the other side
of the receiver
base.

Attach 3/8” washer.

Attach bolt and securely tighten all
bolts with a wrench.

Attach nut loosely-do not
fully tighten until all nuts
and bolts are loosely
placed.

Attach 5/8”washer.

Insert rack into the receiver base
and insert long bolt into receiver
and rack as shown.

Insert clevis pin
into bottom hole 
as shown. 
(Note: clevis pin can be removed
when rack is empty to fold rack
down.  Do not drive with rack in
down position)

Secure with cotter pin