TEAC quick dv-w512gk Manual Do Utilizador

As a general precaution the installation of the hardware 
has to be carried out as described before. The software 
installation starts with activating the reading 
functionality of the drive as this is well known with any 
conventional CD-ROM drive. If the reading functionality 
is available the next installation step is to achieve the 
writing functionality provided of the writer software. 
More details according the installation of your writer 
software you will find in its documentation. 
 
 

According to the Plug-and-Play conventions the optical 
drive is recognized as a standard CD-ROM drive first. 
To make this possible the drives hardware installation 
must have been carried out correctly. After switching on 
your computer, Windows 98/ME /2000/XP will install the 
necessary driver automatically. 
 

 

Do not install any additional drivers with Windows 
98/ME/2000/XP. 

 

After installing the hardware, the reading functionality of 
the optical drive is activated with installing the drivers 
shipped with the corresponding operating system. The 
drivers may be configured and activated aided by the 
system control. Please refer to the manual of your 
operating system for any details. 
 

If there are any problems if other drives are connected 
to the same IDE port (especially IDE-Changer, Phase 
Change Drive, ZIP-Drive, and others), the optical drive 
has to be connected as master as a single drive.