Thermador SEMW302 Manual Do Utilizador
SEM/SEMW Oven Care and Use Manual
39
Warming Drawer Parts and Removal
To remove the drawer:
WARNING:
Do not remove drawer
while hot. Be sure drawer is empty be-
fore removing.
fore removing.
•
Pull drawer to fully open position.
•
Lift up on left side Release Lever and press down
on the right side Release Lever.
on the right side Release Lever.
•
Firmly pull the drawer outward until each Drawer
Rail pulls free from each Inner Cabinet Slide.
Retract Cabinet Rails while drawer is being
cleaned.
Rail pulls free from each Inner Cabinet Slide.
Retract Cabinet Rails while drawer is being
cleaned.
To replace the drawer:
•
Be sure Cabinet Rails are pushed inside cabinet.
•
Align each Drawer Rail to each Inner Cabinet
Slide. Use the Slide Lock to guide placement.
Slide. Use the Slide Lock to guide placement.
•
Close the drawer completely; the Slide Lock will
secure the drawer.
secure the drawer.
•
Pull out drawer fully to check that both locks are
engaged.
engaged.
Removing the Drawer
Parts
1. Moist/Dry Selector
2. Stainless Steel Drawer Inte-
rior
3. Gasket
4. Rail Lock
5. Thermostat Dial
6. ON Light Lens
7. ON Light Viewer
1
2
3
4
5
6
7
Warming Drawer Parts and Removal
Front View
of the Drawer