Savin 3799 Manual Do Utilizador

Key Operator Settings

190

• PSTN Access Number

Use this setting if your machine
is connected to a PBX that re-
quires you to dial certain num-
ber such as "0" followed by a
pause to connect to the outside
line. By registering "0" as the
PSTN Access Number, a pause
will be inserted automatically
after the "0" when dialing.

❖

❖ G3–2 Analog Line

• Own Fax Number (CSI) (up to

20 digits)
Register an international identi-
fication number as your Own
Fax Number (Called Station
Identification), which is passed
to the other party when you
send or receive a fax.

• PSTN Line Type

Select whether the connected
line uses tone or pulse dialing.

• PSTN Access Number

Note

❒ The Own Fax Number (CSI) is

passed to the other party when
you send or receive a fax. When
the Own Fax Number is received,
it is shown on the display or print-
ed on reports on the receiver's or
sender's machine. The Own Fax
Number works even if the receiver
or sender uses a different make of
machine.

AAAA

Press the

{{{{User Tools}}}} key.

BBBB

Enter the code for "Key Op.
Tools" with the number keys.
Then press the

{{{{q

q}}}} key.

The "Key Op. Tools" main menu
appears.

CCCC

Enter the code for "System Set-
tings" with the number keys.

DDDD

Enter the code for "G3 Analog
Line" with the number keys.

Note

❒ If "G3 Analog Line" is not dis-

played, press [

↑↑↑↑Prev.] or [↓↓↓↓Next]

until it is.

EEEE

Enter the code for either "G3-1
Analog Line" or "G3-2 Analog
Line" with the number keys.