Ariens 991082 ZT HD48 Manual Do Utilizador
GB - 32
SHORT TERM
NEVER spray unit with high-pressure water
or store unit outdoors.
or store unit outdoors.
Inspect unit for visible signs of wear,
breakage or damage.
breakage or damage.
Keep all nuts, bolts and screws properly
tightened and know unit is in safe working
condition.
Store unit in a cool, dry protected area.
tightened and know unit is in safe working
condition.
Store unit in a cool, dry protected area.
LONG TERM
Clean unit thoroughly with mild soap and low
pressure water and lubricate (See Lubricate Unit on page 24 in Maintenance). Touch up
all scratched painted surfaces.
Remove weight from wheels by putting
blocks under frame or axle.
pressure water and lubricate (See Lubricate Unit on page 24 in Maintenance). Touch up
all scratched painted surfaces.
Remove weight from wheels by putting
blocks under frame or axle.
When storing unit for extended periods of
time, remove all fuel from tank and carburetor
(run dry). Refer to Engine Manual.
time, remove all fuel from tank and carburetor
(run dry). Refer to Engine Manual.
Clean and charge the battery. Charge battery
every three to four weeks when storing unit.
every three to four weeks when storing unit.
Fuel System
Gasoline left in the fuel system for extended
periods without a stabilizer will deteriorate,
resulting in gum deposits in the system.
These deposits can damage the carburetor
and the fuel hoses, filter and tank. Prevent
deposits from forming in the fuel system
during storage by adding a quality fuel
stabilizer to the fuel. Follow the
recommended mix ratio found on the fuel
stabilizer container.
periods without a stabilizer will deteriorate,
resulting in gum deposits in the system.
These deposits can damage the carburetor
and the fuel hoses, filter and tank. Prevent
deposits from forming in the fuel system
during storage by adding a quality fuel
stabilizer to the fuel. Follow the
recommended mix ratio found on the fuel
stabilizer container.
To treat the fuel system for storage:
1. Add fuel stabilizer according to
manufacturers’ instructions.
2. Run engine for at least 10 minutes after
adding stabilizer to allow it to reach the
carburetor.
carburetor.
NEVER store the engine with fuel in the fuel
tank inside of a building with potential
sources of ignition.
tank inside of a building with potential
sources of ignition.
To Take the Unit Out of Storage
1. Refer to the engine service manual to
prepare the engine for service.
2. Put fresh, clean fuel in the fuel tank.
3. Begin the maintenance schedule.
4. Charge and install the battery.
3. Begin the maintenance schedule.
4. Charge and install the battery.
STORAGE
WARNING: AVOID INJURY.
Read and understand entire
Safety section before proceeding.
Read and understand entire
Safety section before proceeding.
ACCESSORIES
Part No.
Description
79100400
Mulching Kit 48-inch Decks
79206400
Mulching Kit 52-inch Decks
79206500
Mulching Kit 60-inch Decks
79206700
Striper Kit
79100700
Discharge Cover Kit 48-inch
Decks
Decks
79100800
Discharge Cover Kit 52-inch
Decks
Decks
79206800
Discharge Cover Kit 60-inch
Decks
Decks
79202700
Headlight Kit
79102500
Bagger Adapter Kit 60-inch Decks
79102600
Bagger Adapter Kit 52-inch Decks
79102700
Bagger Adapter Kit 48-inch Decks
89100300
HD Series Bagger
SERVICE PARTS
Part No.
Qty
Description
21547900
1
Fuel Filter (991082, 083,
084, 090)
084, 090)
21545700
1
Fuel Filter (991091)
21548000
1
Air Filter (991082, 083,
084, 090)
084, 090)
21545800
1
Air Filter (991091)
21545900
1
Air Pre-Cleaner (991091)
21397200
1
Engine Oil Filter (991091)
21548100
1
Engine Oil Filter (991082,
083, 084, 090)
083, 084, 090)
21545100
2
Hydraulic Oil Filter
21547800
2
Spark Plug (991082, 083,
084, 090)
084, 090)
21544000
2
Spark Plug (991091)
07200025
1
PTO Belt – 48-inch Decks
07200026
1
PTO Belt – 52-inch Decks
07200028
1
PTO Belt – 60-inch Decks
07211500
1
Traction (Hydro Pump) Belt
00450200
1
Blade – 48-inch Decks
03253800
1
Blade – 52-inch Decks
03253900
1
Blade – 60-inch Decks