Adam Equipment cbw-12ah Manual Do Utilizador

 
 
[Limit]

 

It sets the limits for check 
weighing and allows setting of 
either the low limit or the high 
limit or both. 
 
 

 

A secondary function       
is available to move the active digit 
to the right when setting values for 
parameters or other functions. 
 

 

It enters the percent weighing 
function.  Allows the weight, 
unit weight, and count to be 
seen when parts counting. 
 
 

  A secondary function       is 

available to move the active digit to 
the left when setting values for 
parameters or other functions. 
 

 

This is used to select the 
function of the scale.  When 
the scale is weighing, it will 
select parts counting.  When it 
is not in the weighing mode it 
will return the user to weighing. 
 
 

 

A secondary function [C] is 
available to act as a clear key 
when setting values for parameters 
or other functions. 
 

 

It is used to print the results to 
a PC or printer using the RS-
232 interface.  It also adds the 
value to the accumulation 
memory if the accumulation 
function is not automatic. 
 
 

 

A secondary function [ESC] is 
used to return to normal operation 
when the scale is in a parameter 
setting mode. 
 

It is used to change the 
weighing units of the display 
from kilograms to grams and 
back to kilograms for CBW 
series. 
 
For  CBWa scales this key will 
select kilograms, grams, 
Pounds and Pounds/ounces 
for the weighing unit, if 
enabled. This should only be 
done in gross weighing or at 
zero. 
 

 None. 

 
 
 

7