Sanyo PLC-XU74 Manual Do Utilizador

To the AC outlet.

14

This projector uses nominal input voltages of 100-120 V 

or 200-240 V AC.  This projector automatically selects 

the correct input voltage.  It is designed to work with 

single-phase power systems having a grounded neutral 

conductor.  To reduce the risk of electrical shock, do not 

plug into any other type of power system.

Consult your authorized dealer or service station if you 

are not sure of the type of power being supplied.

Connect the projector with all peripheral equipment 

before turning the projector on. (See pages 15-17 for 

connection.) 

Connect the AC power cord (supplied) to the 

projector.

The AC outlet must be near this equipment 

and must be easily accessible.

NOTE ON THE POWER CORD
AC power cord must meet requirements of the country where you use the projector.

Confirm the AC plug type with the chart below and proper AC power cord must be used.

If supplied AC power cord does not match your AC outlet, contact your sales dealer.

To power cord 

connector on your 

projector.

Ground

To the AC outlet.

To the AC outlet.

  

For safety, unplug the AC power cord when the projector is 

not in use.  When this projector is connected to an outlet with 

the AC power cord, it is in Stand-by mode and consumes a 

little electric power.