Sharp MX-2300G Manual Do Utilizador
61
REPLACING THE WASTE TONER BOX
The waste toner box collects residual toner that is produced during printing. When the used toner box is full, the display
will show "Replace used toner container". Follow the procedure below to replace the used toner box.
will show "Replace used toner container". Follow the procedure below to replace the used toner box.
1
Open the front cover.
2
Release the used waste toner box.
Press the waste toner box release button.
The waste toner box will fall forward as shown.
Gently support the box with your hands as you let it fall forward
as far as it will go.
Gently support the box with your hands as you let it fall forward
as far as it will go.
3
Remove the waste toner box.
Hold the box by both hands and lift it up slowly.
If the waste toner box falls too far forward, it will not be possible
to remove it. (Remove the box when it is at an angle of about
30 degrees.)
If the waste toner box falls too far forward, it will not be possible
to remove it. (Remove the box when it is at an angle of about
30 degrees.)
4
Place the box on a flat surface.
Place a sheet of newspaper on the surface before placing the
box.
box.
Do not point the holes down as used toner will spill out.