aquatherm 10204-12 Manual Do Utilizador
2
MOUNTING
COMPONENTS
DIAGRAM
COMPONENTS
DIAGRAM
MOUNTING COMPONENTS
This section provides descriptions and part numbers of the
Aquatherm Industries Installation Kits required for each
solar pool heating system. The mounting location of each
kit component is shown by the corresponding circled num-
ber in the ‘Mounting Components’ diagram, shown above.
Aquatherm Industries Installation Kits required for each
solar pool heating system. The mounting location of each
kit component is shown by the corresponding circled num-
ber in the ‘Mounting Components’ diagram, shown above.
The Collector Installation Kit (Part #12034-1 for 1 1/2” kit;
#12034-2 for 2” kit) contains the parts needed to fasten a single
solar collector to a supporting surface and to make water connec-
tions from one collector to another. Hold-down strap is not includ-
ed and must be ordered separately Use one (1) kit per collector.
solar collector to a supporting surface and to make water connec-
tions from one collector to another. Hold-down strap is not includ-
ed and must be ordered separately Use one (1) kit per collector.
1
Part No Qty 1 1/2”
Qty 2”
Description
10008-1
1
__
Outlet header hold-down bracket assembly
10008-2 __
1
Outlet header hold-down bracket assembly
50006
2
2
Hold-down strap bracket
60001-1
2
__
Collector connector hose (3 3/4” long)
60002-1 __
2
Collector connector hose (3 3/4” long)
60546-1
4
__
Hose clamp, stainless steel
60546-2 __
4
Hose clamp, stainless steel
The System Kit (Part #12135-1 for 1 1/2” kit; #12135-2
for 2” kit) contains additional hold-down hardware, connec-
tion parts and adapters needed to complete water connec-
tions from the collectors to the system feed and return line.
The pipe adapters that connect the system piping to the col-
lectors are high temperature CPVC. The system check
valve is 1 1/2” - 2” PVC. Installation and homeowner manu-
als are also included. Use one (1) kit per system.
tion parts and adapters needed to complete water connec-
tions from the collectors to the system feed and return line.
The pipe adapters that connect the system piping to the col-
lectors are high temperature CPVC. The system check
valve is 1 1/2” - 2” PVC. Installation and homeowner manu-
als are also included. Use one (1) kit per system.
2
Part No Qty 1 1/2”
Qty 2”
Description
10003-1
1
__
Vacuum Relief Valve
10003-2 __
1
Vacuum Relief Valve
10008-1
1
__
Outlet header hold-down bracket assembly
10008-2 __
1
Outlet header hold-down bracket assembly
10011
4
4
Hold-down strap clamp assembly
30061-1
1
__
End cap
30061-2 __
1
End cap
30089-1
2
__
Pipe adapter
30089-2 __
2
Pipe adapter
50006
2
2
Hold-down strap bracket
60001-2
2
__
System connector hose (7” long)
60002-2 __
2
System connector hose (7” long)
60546-1
4
__
Hose clamp, stainless steel
60546-2 __
4
Hose clamp, stainless steel
60019-2
1
1
Check Valve (1 1/2” & 2”)
19001
1
1
Installation Manual
19186
1
1
Owner’s Manual