Netgear WNR2000 Manual Do Utilizador

Página de 146
NETGEAR Wireless-N 300 Router WNR2000 User Manual 
Customizing Your Network Settings
4-13
v1.3, July 2009
To set up a wireless network using WDS, 
t
he following conditions must be met for both APs:
Both APs must use the same SSID, wireless channel, and encryption mode (see 
“Manually 
Configuring Your Wireless Settings” on page 2-4
 or 
“Using Push 'N' Connect (WPS) to 
Configure Your Wireless Network” on page 2-12
).
Both APs must be on the same LAN IP subnet. That is, all the AP LAN IP addresses are in the 
same network.
All LAN devices (wired and wireless computers) must be configured to operate in the same 
LAN network address range as the APs.
If you make changes in the Wireless Settings screen, click Apply so that they take effect.
Wireless Repeating Function 
You can view or change wireless repeater settings for the wireless router. From the main menu of 
the browser interface, under Advanced, click Wireless Repeating Function to display the 
Wireless Repeating Function screen.
The wireless router supports two modes of the wireless repeating function, and allows you to 
control wireless client association:
Wireless Repeater. The wireless router sends all traffic from its local wireless or wired 
computers to a remote AP. To configure this mode, you must know the MAC address of the 
remote parent AP. 
Figure 4-8