Tektronix Phaser 350 Manual Do Utilizador

The front panel displays messages indicating the condition of the printer.  
Some messages, such as 

Standby

 and 

Warming Up

, simply provide status 

information.  These messages do not require user action.  Error messages, 
such as 

Jam:Open Front Cover

, require you to perform some action such 

as remove a paper jam.  Use the following table to determine the appropriate 
action for each type of front panel message.

The printer may display a numeric error code when it detects certain types 
of problems.  If you see a numeric error code, first write down the number.  
Try turning off the printer’s power and wait at least 15 seconds before 
turning the power on again.  If that does not solve the problem, call your 
local Tektronix office for assistance or call Tektronix Service in the U.S. and 
Canada at 1-800-835-6100.

<printer network 
name>

No user action required.  The printer is ready to print.

Busy < message >

No user action required.

Check Print

The printer is waiting for confirmation of the print job 
from the front panel.

Cleaning

No user action required.  The printer is running an 
automatic cleaning operation.

Clearing Job

No user action required.  May be displayed after you 
press the 

 button.

Close Front Cover

Close the front cover.

Close Top Cover

Close the top cover.

Close Exit Cover

Close the exit cover.

Energy Star Mode

Press 

 or send a print job to bring the printer

to 

Ready

.

Fault.  Service 
Required

Turn the printer off, wait at least 15 seconds and turn 
the printer’s power on again.  If the failure persists, note 
the code number in the display.  In the U.S., call 
Tektronix service at 1-800-835-6100.  Outside the U.S., 
contact your local Tektronix office.