Sanyo clt-u22 Manual Do Utilizador

• Did the handset beep when you pressed TALK?  Did the CHARGE/IN USE

indicator come on? The battery may need to be charged.

Dial tone is OK, but cannot dial out

• Make sure the TONE/PULSE dialing mode is set to TONE or PULSE

according to your phone service.

Handset does not ring

• Make sure the RINGER switch on the handset is turned to ON.

• You may have too many extension phones on your line. Try unplugging

some phones.

• See solutions for No dial tone.

You experience static, noise, or fading in and out

• Change channels.

• Is handset out of range? Move closer to the base.

If you hear 3 short beeps when you press TALK, you are out of range.

• Does the base need to be relocated?

• Charge battery.

• Make sure base is not plugged into an outlet with another household

appliance.

Phone beeps

• Place handset in base for a minimum of 20 seconds to reset the security

code. If that does not work, charge battery for 12 continuous hours.

• Clean charging contacts on handset and base with a soft cloth or an

eraser.

• See solutions for No dial tone.

• Replace battery.

Dialing from Memory

• Did you program the directory keys correctly?

• Did you follow proper dialing sequence?

• Make sure the TONE/PULSE dialing mode is set to TONE or PULSE

according to your phone service.

• Did you reprogram directory after a power outage or battery replacement?