Ariens 911183 LM21S CLASSIC Manual Do Utilizador
GB - 13
Speed Control (self-propelled
models)
models)
Speed control rod changes the mower’s
forward travel speeds.
forward travel speeds.
Start mowing slowly and use speed control
rod to gradually increase speed to a safe,
comfortable walking pace.
rod to gradually increase speed to a safe,
comfortable walking pace.
Speed control rod should hold the desired
speed. If not, adjust speed control bell crank.
(See SPEED CONTROL BELL CRANK on
page 23.)
speed. If not, adjust speed control bell crank.
(See SPEED CONTROL BELL CRANK on
page 23.)
Wheel Drive Control
(self-propelled
models)
NOTE: Engine must be running for wheel
drive to propel unit.
To drive forward:
drive to propel unit.
To drive forward:
Slowly squeeze and hold wheel drive control
against handlebar.
To stop:
against handlebar.
To stop:
Release wheel drive control.
Swivel Wheel Lock (911184)
To hold wheel straight:
1. Push swivel wheel lock forward.
2. Push unit forward until wheel locks in
2. Push unit forward until wheel locks in
place.
To allow wheel to swivel:
1. Pull swivel wheel lock back.
Figure 7
Fast –Push rod all the
way forward.
way forward.
Slow –Pull rod all the
way rearward.
way rearward.
CAUTION: Unit will move forward
at engine start if wheel drive
control is engaged. ALWAYS
release wheel drive control before
starting unit.
at engine start if wheel drive
control is engaged. ALWAYS
release wheel drive control before
starting unit.
CAUTION: Avoid loss of control.
Lock swivel wheels when mowing
on a slope or hill. Do not mow on
steep slopes.
Lock swivel wheels when mowing
on a slope or hill. Do not mow on
steep slopes.
STOP
GO
OM1240