Ariens 911183 LM21S CLASSIC Manual Do Utilizador

GB - 4

Look for these symbols to point 
out important safety precautions. 
They mean:

The safety alert symbols above and signal 
words below are used on decals and in this 
manual.

Read and understand all safety messages.

NOTE:  General reference information for 
proper operation and maintenance practices.
IMPORTANT: Specific procedures or 
information required to prevent damage to 
unit or attachment.

Practice usual and customary safe working 
precautions, for the benefit of yourself and 
others. Understand and follow all safety 
messages. Be alert to unsafe conditions and 
the possibility of minor, moderate, or serious 
injury or death. Learn applicable rules and 
laws in your area.

Original purchaser of this unit was instructed 
by the seller on safe and proper operation. If 
anyone other than the original purchaser will 
use the unit, ALWAYS provide this manual 
and any needed safety training before 
operation.

WARNING: This cutting machine 
is capable of amputating hands 
and feet and throwing objects. 
Failure to observe the safety 
instructions in the manuals and 
on decals could result in serious 
injury or death.
Slopes are a major factor related 
to slip and fall accidents. 
Operation on all slopes requires 
extra caution.

Tragic accidents can occur if the 
operator is not alert to the 
presence of children. Never 
assume that children will remain 
where you last saw them.
Gasoline is extremely flammable 
and the vapors are explosive, 
handle with care.

Stop unit and engine, remove key 
(if equipped) and allow moving 
parts to stop before leaving 
operator’s position.

DANGER: IMMINENTLY 
HAZARDOUS SITUATION! If not 
avoided, WILL RESULT in death or 
serious injury.

WARNING: POTENTIALLY 
HAZARDOUS SITUATION! If not 
avoided, COULD RESULT in 
death or serious injury.

CAUTION: POTENTIALLY 
HAZARDOUS SITUATION! If not 
avoided, MAY RESULT in minor or 
moderate injury. It may also be 
used to alert against unsafe 
practices.