at-international cl82551 Manual Do Utilizador

If you have 
DSL high-speed 
Internet service, 
a DSL filter (not 
included) is 
required.

Plug the power 
adapter into an 
electrical outlet not 
controlled by a wall 
switch.

Battery installation
Install the battery as shown below. Charge your handset(s) before initial use. 

The battery is fully charged after 10 hours of continuous charging.

CL82101/CL82201/CL82301/CL82351/CL82401/CL82451/
CL82501/CL82551/CL82601

Plug the power cord 
and telephone line 
cord into the jacks. 

Route the 
cords through 
the slot. 

Plug the other end 
of the telephone 
line cord into a 
telephone jack or 
a DSL filter.

3. Charge the handset by 

placing it face forward 
in the telephone base 
or charger.

Use only the supplied rechargeable battery or replacement battery (model BT166342).

Raise the 
antenna.

Caution: Use only the power adapter provided with this product. To obtain a replacement, visit 
our website at 

 or call 

.  

In Canada, dial 

.

q

Show caller ID history.
Scroll down in menus.
Move cursor to the left when  

  entering names or numbers.

Decrease listening volume when  

  on a call, or decrease message  
  playback volume.

•
•
•

•

Mute the microphone during a  

  call.

Delete the displayed entry while  

  in the directory, call log or redial  
  list.

Delete digits or characters when  

  using the dialing keys. 

•

•

•

PHONE/FLASH
Make or answer a call.
Answer a call waiting call during  

  a call.

•
•

Switch between the speakerphone 
and handset.

pDI�/VOLUME

Show directory entries.
Scroll up in menus.
Move cursor to the right when  

  entering names or numbers.

Increase listening volume when  

  on a call, or increase message  
  playback volume.

•
•
•

•

Show the menu.
Select an item or save an entry  

  or setting while in the menu.

•
•

Hang up a call.
Press to cancel an operation,  

  back up to the previous  

 

  menu, or exit the menu display,  
  or press and hold to return to  
  idle mode

Press and hold in idle mode to  

  erase missed call indicator.

•
•

•

Press repeatedly to view the last  

  10 numbers dialed. 

Press and hold to insert a dialing  

  pause while entering numbers. 

•

•

1
Press repeatedly to add or remove 1 
in front of the call log entry before 
dialing or saving it to the directory. 

# (pound key)
Press repeatedly to display other  
dialing options when reviewing a  
caller ID log entry. 

EQ 
Change the audio quality to best 
suit your hearing. 

Quick reference guide 

TONE 
Press to switch to tone dialing 

temporarily during a call if you have 

pulse service. 

Turn the built-in answering 
system on or off. 

Repeat a message. 
Press twice to play the  

  previous message.  

•
•

Delete the message  

  currently playing.

Press twice to delete  

  all old messages when  
  in idle mode.

•

•

Skip to the next message. 

Start or stop message 
playback. 

Shows the number 
of messages or other 
answering system 
information. 

Initiate a one-to-one or 

 

  one-to-group broadcast.

Press and hold to broadcast  

  to a group of handsets.

•

•

q/VOL/p

Adjust the listening  

  volume during    
  message playback.

Adjust the base ringer  

  volume when in idle  
  mode.

•

•

Initial settings

 

The following are a few examples of common features to set before using the 
telephone. Refer to the 

Handset settings and Answering system settings in 

the Abridged user’s manual or the online Complete user’s manual for detailed 
instructions on setting all telephone features. 

Set date/time

Set the date/time before using the answering system.
1.

->

 q or p -> Set date/time -> SELECT.

2.

 q or p to choose month, or enter the number -> SELECT.

3.

 q or p to choose day, or enter the number -> SELECT.

4.

 q or p to choose year, or enter the number -> SELECT.

5.

 q or p to choose hour, or enter the number -> SELECT.

6.

 q or p to choose minute, or enter the number -> SELECT.

7.

 q or p to choose AM or PM -> SELECT.

Record your own announcement

Your outgoing announcement plays when calls are answered by the answering 
system. You can use the preset announcement to answer calls, or replace it 
with your own recorded announcement.

1. 

->

q or p

->

Answering sys -> SELECT.

2.

 SELECT to select Announcement.

3.

 q or p -> �ecord annc -> SELECT.

4. Facing the handset, record your announcement and press 

5 to end recording.

Number of rings

You can set the answering system to answer an incoming call after 2, 3, 4, 5 or 
6 rings, or toll saver. If you choose toll saver, the answering system answers a 
call after 2 rings if you have new messages, and after 4 rings when there are 
no new messages. 
If you want the built-in answering system instead of the voicemail to answer 
a call, you should set the answering system to answer a call at least 2 rings 
before the voicemail is set to answer. Contact your telephone service provider 
for information on your voicemail settings.

1. 

->

q or p

->

Answering sys -> SELECT.

2.

 q or p -> Ans sys setup -> SELECT.

3.

 q or p -> # of rings -> SELECT.

4. q or p

 -> Choose among 2, 3, 4, 5, 6 or Toll Saver -> SELECT.

Handset ringer volume

You can set the ringer volume level to one of the six levels or turn the  
ringer off. 
1.

 MENU -> q or p -> �ingers -> SELECT. 

2.

 SELECT to select �inger volume -> SELECT.

3.

 q or p to choose the desired level -> SELECT.

Language

If you want to change the display language, or you have accidentally changed 
the language and want to switch it back to English, follow the steps below.   
1.

 MENU -> q 7 times -> SELECT twice.

2.

 q or p to choose the desired language, or choose English if you want to 

   change the display language to English ->

 SELECT.

1. Plug the battery 

connector securely 
into the socket inside 
the handset battery 
compartment, matching 
the color-coded label. 
Insert the supplied 
battery with the label 
THIS SIDE UP facing up 
as indicated.

2. Align the cover 

flat against 
the battery 
compartment, 
then slide it 
upwards until it 
clicks into place.