Ariens 911162 - LM21S Manual Do Utilizador

GB - 3

The Ariens dealer must register the product 
at the time of purchase. Registering the 
product will help the company process 
warranty claims or contact you with the latest 
service information. All claims meeting 
requirements during the limited warranty 
period will be honored, whether or not the 
product registration card is returned. Keep a 
proof of purchase if you do not register your 
unit. 
Customer Note: If the Dealer does not 
register your product, please fill out, sign and 
return the product registration card to Ariens 
or go to www.ariens.com on the internet.

Use only Ariens replacement parts. 
Replacing any part on this vehicle with 
anything other than an Ariens authorized 
replacement part may adversely affect the 
performance, durability, or safety of this unit 
and may void the warranty. Ariens disclaims 
liability for any claims or damages, whether 
warranty, property damage, personal injury or 
death arising out of the use of unauthorized 
replacement parts. To locate your nearest 
Ariens Dealer, go to www.ariens.com on the 
internet. 

Dealer should:

1. Check that all assembly and 

adjustments have been properly 
completed. 

2. Fill out Original Purchaser Registration 

Card and return the card to Ariens.

3. Explain Ariens Limited Warranty Policy.
4. Explain recommended lubrication and 

maintenance. Advise customer on 
adjustments. Remind customer to 
change oil in 4 cycle engine crankcase 
after first five (5) hours of operation.

5. Instruct customer on controls and 

operation of unit. Discuss and 
emphasize the Safety Rules. Give 
customer Owner/Operator, Parts, and 
Engine manuals. Advise customer to 
thoroughly read and understand them.

Ariens reserves the right to discontinue, 
make changes to, and add improvements 
upon its products at any time without public 
notice or obligation.The descriptions and 
specifications contained in this manual were 
in effect at printing. Equipment described 
within this manual may be optional. Some 
illustrations may not apply to your unit.

Look for these symbols to point 
out important safety precautions. 
They mean:

The safety alert symbols above and signal 
words below are used on decals and in this 
manual.

Read and understand all safety messages.

WARNING: This cutting machine 
is capable of amputating hands 
and feet and throwing objects. 
Failure to observe the safety 
instructions in the manuals and 
on decals could result in serious 
injury or death.
Slopes are a major factor related 
to slip and fall accidents. 
Operation on all slopes requires 
extra caution.

Tragic accidents can occur if the 
operator is not alert to the 
presence of children. Never 
assume that children will remain 
where you last saw them.

Gasoline is extremely flammable 
and the vapors are explosive, 
handle with care.
Stop unit and engine, remove key 
(if equipped) and allow moving 
parts to stop before leaving 
operator’s position.

DANGER: IMMINENTLY 
HAZARDOUS SITUATION! If not 
avoided, WILL RESULT in death or 
serious injury.

WARNING: POTENTIALLY 
HAZARDOUS SITUATION! If not 
avoided, COULD RESULT in 
death or serious injury.