Manualsbrain.com
  1. Manuais
  2. Marcas
  3. American Dynamics
  4. 8200-0181-03
  5. Manual Do Utilizador

American Dynamics 8200-0181-03 Manual Do Utilizador

Download
Página de 8
SPEEDDOME OPTIMA LT PROGRAMMABLE DOME CAMERA 
8200-0181-03, REV. C 
QUICK REFERENCE GUIDE 
6 of 8 
 
AD2083-02B Code Converter 
See Supported AD Keyboards on page 5 for 
button names used on specific keyboards. 
Operate Commands 
The controller must be in Operate mode to use 
these commands. 
Dome Function 
Keyboard Command 
Call Preset 1-16 
1-16 Shot 
Reset Iris 
66 Shot 
Flip 
67 Shot 
Run Pattern # 1 
70 Shot 
Run Pattern # 2 
71 Shot 
Run Pattern # 3 
72 Shot 
Auto Repeat Pattern #1 
69 Shot, then 70 Shot 
Auto Repeat Pattern #1 
69 Shot, then 71 Shot 
Auto Repeat Pattern #1 
69 Shot, then 72 Shot 
In addition, the following commands are not 
supported: 
•  Set Auxiliary 4 OFF (63 Shot) 
•  Set Auxiliary 4 ON (64 Shot)  
Program Commands 
The controller must be in Program mode to use 
these commands. 
Dome Function 
Keyboard Command 
Reset Dome 
65 Shot 
Program Preset 
1-16 Shot 
Define Pattern #1 
70 Shot 
Define Pattern #2 
71 Shot 
Define Pattern #3 
72 Shot 
End Pattern Definition 
68 Shot 
Save New Pattern 
69 Shot 
Clear Pattern #1 
62 Shot 
Clear Pattern #2 
63 Shot 
Clear Pattern #3 
64 Shot 
Enter V-phase Adjustment 
67 Shot, followed by iris 
open/close 
Exit V-phase Adjustment 
67 Shot 
MegaPower 48 Matrix Switcher/ 
Controller System 
See Supported AD Keyboards on page 5 for 
button names used on specific keyboards. 
Dome Function 
Keyboard Command 
Define Pattern # 1  
121 - F2 
Define Pattern # 2  
122 - F2 
Define Pattern # 3  
123 - F2 
End Pattern Definition  
120 - F2 
Save New Pattern 
130 - F2 
Go to Pattern # 1 
31 - F1 
Go to Pattern # 2 
32 - F1 
Go to Pattern # 3 
33 - F1 
Run Pattern # 1 
21 - F1 
Run Pattern # 2 
22 - F1 
Run Pattern # 3 
23 - F1 
Auto Repeat Pattern # 1 
41 - F1 
Auto Repeat Pattern # 2 
42 - F1 
Auto Repeat Pattern # 3 
43 - F1 
Clear Pattern # 1 
(SpeedDome RS-422) 
131 - F2 
Clear Pattern # 2 
(SpeedDome RS-422) 
132 - F2 
Clear Pattern # 3 
(SpeedDome RS-422) 
133 - F2 
Flip (Rotate dome 180º) 
19 - F1 
Reset Iris  
20 - F1 
Return to Auto Iris / Auto 
Focus  
69 - F1 
Reset Dome  
30 - F1 
Enter Vertical Phase 
Adjust Mode  
38 - F2 
Exit Vertical Phase Adjust 
Mode  
39 - F2 
 
In addition, the following commands are not 
supported: 
•  Set Auxiliary 4 OFF (70-F1) 
•  Set Auxiliary 4 ON (71-F1)