Perle Systems TS2 Manual Do Utilizador

Configuration Methods  34

DeviceManager

All discovered IOLAN will be displayed on the list along with their name and IP address. When a 
new IOLAN is discovered on the network, that has not yet been assigned an IP address, it will be 
displayed with an IP Address of Not Configured. To configure the IP address, click on the IOLAN 
and then click the 

 button. 

Choose the method you want to use to assign an IP address to the IOLAN:

z

Type in the IP address that you want to assign to this IOLAN

z

Enable the 

 option. This will turn 

on DHCP/BOOTP, so the IOLAN will attempt to get its IP address from your DHCP/BOOTP 
server. If you don’t have a DHCP/BOOTP server, DeviceManager will temporarily assign an IP 
address in the range of 

-

 that will be used only for the duration 

of the DeviceManager/IOLAN communication.

After you configure the IP address, click the 

 button.

The refreshed list will now display the assigned IP address for the new IOLAN. To connect to the 
IOLAN, click the IOLAN entry and click 

. You will be asked to supply the Admin password (the 

factory default password is 

).

If you have a successful connection, the DeviceManager will retrieve the configuration and then 
display the IOLAN’s System Information and you can begin configuring the IOLAN. 

The DeviceManager does not automatically update the IOLAN’s configuration. You must 
download the configuration changes to the IOLAN and then reboot the IOLAN to make the 
configuration changes take effect