Precor move beyond 9.23 Manual Do Utilizador

INCLINE: Press and hold the INCLINE arrow keys to 
increase or decrease the incline from 0% to 15% in 
0.5% increments.

Changes to the incline are not immediate. It takes 
time for the lift to reach the target incline shown on 
the display.

The incline setting affects the column height in the 
program profile. Refer to Diagram 10. The INCLINE 
display shows the new setting.

QUICKSTART: Press QUICKSTART to start your 
workout immediately using the Manual Program. 
Refer to Choosing QUICKSTART.

STOP: A firm tap on the red STOP key slows the 
running belt to a stop and the treadmill enters pause 
mode. To resume, press QUICKSTART or the 
SPEED up arrow key. To reset to the banner, hold the 
red STOP key for a few seconds or press it two more 
times. Refer to Pausing During a Workout or the 
Cool-Down Period.

SPEED: Press and hold the SPEED arrow keys to 
increase or decrease the running belt speed in 0.1 
increments from 0.5 to 12 mph (0.5 to 20 kph).

When you press the arrow keys, a target speed 
appears in the display. The running belt speed 
changes to meet the target, but the change occurs 
gradually so the transition is smooth. 

92x_Owners Manual.book  Page 20  Tuesday, April 22, 2008  8:18 AM