Peavey PageMatrix Manual Do Utilizador

10

2 . 3 .   S t a t i o n   F o u r

™

D e s k t o p   P a g i n g   S t a t i o n

Station Four

ª

is a four button desktop station that includes an electret condenser microphone. Each

of the four button zone presets are defined and programmed by the PageMatrix software. 

Push To Talk button:
Press and hold to enable the microphone for the 
selected zone preset. The selected LED will turn 
orange to denote active status while the other zone 
preset LEDs become red. 

Zone Preset buttons w/ LED(4):
Used to select any one of the four zone presets. A
green LED indicates the zone is available, while a red  
LED indicates it is in use by another station. The LED 
will blink to confirm selection. 

XLR Mic Input: 
Phantom powered microphone input

Mic Volume: 
Recessed mic gain adjustment

5-pin Aux Mic Input 
For connection of a remote microphone with a push-to-talk feature. See the wiring 
diagram, Appendix 5.4. The aux mic is automatically routed to zone preset one.

S t a t i o n   F o u r   O p e r a t i o n

▲

LED color indicates status of each of the four Zone presets. 

▲

Green indicates the zone is available and not in use by another station. 

▲

Red indicates the zone is in use.

▲

When the Push To Talk button is pressed, the selected zone preset LED turns orange to 
confirm that it is active. Other stations connected to the system will indicate RED to confirm 
that this particular zone preset is in use. 

▲

Press any zone preset button to select. The LED will blink confirming the selection. 

▲

At power-up, the unit defaults to zone one and after one minute of inactivity reverts back to 
zone one.

▲

Zone presets can be labeled in the appropriate white boxes.

▲

If all LEDs flash red at power up, this indicates the station has not been programmed. 

▲

If all LEDs flash green at power up, this indicates the station has been programmed. 

▲

The Aux mic input (rear panel) is always routed to zone preset one.