Philips 28pw8807 Manual Do Utilizador
23
Connect Peripheral Equipment
&
Insert the plug into the headphone socket L at the right side of the TV.
é
Press ¬ on the remote control to switch off the internal loudspeakers
of the TV.
The headphone impedance must be between 8 and 4000 Ohm.
The headphone socket has a 3.5 mm jack.
of the TV.
The headphone impedance must be between 8 and 4000 Ohm.
The headphone socket has a 3.5 mm jack.
In the
SOUND
menu select
Headphone volume
to adjust the headphone
volume, see p. 12.
L
Connect the audio cables to the audio input of your audio equipment and to
AUDIO L
and
R
at the back of your TV.
You can listen to your TV sound via your audio equipment.
If you want to connect more equipment to your TV, consult your dealer.
AUDIO
&
Connect your camera or camcorder to sockets at the right side of your TV.
é
Connect the equipment to
VIDEO
2 and
AUDIO L
3 for mono
equipment.
“
For stereo equipment also connect
AUDIO R
3.
S-VHS quality with an S-VHS camcorder is obtained by connecting the S-VHS
cables with the
cables with the
S-VIDEO
input 1 and
AUDIO
inputs 3.
AUD
IO
VID
EO
S•VID
EO
3
2
1
Connect your digital equipment with a eurocable 1 to one of the
euroconnectors (
euroconnectors (
EXT1
,
EXT2
or
EXT3)
, or with a cinch cable to the
VIDEO
input at the right side of the TV (see illustration above).
Note: the low quality of some digital picture material may be the cause of digital
image distortion. In this case select
image distortion. In this case select
Eco
under the
SMART PICTURE
a key on the
remote control as this setting is intended to improve distorted picture quality.
1/2/3
EXTERNAL
DVD
1
Audio equipment / Amplifier
Headphone
Digital equipment (DVD, digital satellite tuner,...)
Camera & camcorder