Philips ct3328-bj1ua0hk Manual Do Utilizador
11
Getting
started
2
Remove the battery pack by sliding it
downwards from its slot (1), then lifting it
upwards (2).
downwards from its slot (1), then lifting it
upwards (2).
3
Then hold the phone upside down and
place your forefinger on the connectors.
Press the two inner clips with your left
fingers as shown opposite (1) and pull the
cover from the top while pushing the inside
part of the phone with your forefinger still
on the connectors (2).
place your forefinger on the connectors.
Press the two inner clips with your left
fingers as shown opposite (1) and pull the
cover from the top while pushing the inside
part of the phone with your forefinger still
on the connectors (2).
L
Make sure you handle the product with care
when the front is removed, in order not to
damage the joystick key which is then
unprotected, and also try not to touch the screen
Do not turn on your mobile phone when front
and back covers are removed.
when the front is removed, in order not to
damage the joystick key which is then
unprotected, and also try not to touch the screen
Do not turn on your mobile phone when front
and back covers are removed.
4
Remove the keypad and place it in the
front cover that will replace the one you
just removed.
front cover that will replace the one you
just removed.
5
Put the new front cover on your phone:
hook the front housing onto the hinges on
the top of the phone (1), then press the
bottom down until the latches catch (2).
hook the front housing onto the hinges on
the top of the phone (1), then press the
bottom down until the latches catch (2).
Fisio620_GB_4311 255 51332.book Page 11 Lundi, 1. juillet 2002 11:07 11