Philips ct9888-faua1na7 Manual Do Utilizador
70
Bluetooth
features
3
To end your call, simply press the Answer/end button on the headset, or
the hang-up key on your mobile phone.
the hang-up key on your mobile phone.
Answer a call
When receiving a call, the
Incoming call
symbol flashes while your mobile rings
and/or vibrates and the headset beeps. To answer the call, press the Answer/
end button of the headset or press
end button of the headset or press
,
on the phone, select
Use headset
and
press
,
.
L
To answer a call with the headset, it must be fairly close to your mobile phone.
Toggle between headset and mobile
While in communication with a correspondent, you can switch your call from
the headset to the mobile and vice versa as follows: while the call is in progress,
press
the headset to the mobile and vice versa as follows: while the call is in progress,
press
,
, select
Move to headset
or
Move to phone
and press
,
to
confirm your choice.
You can also
You can also
Move to headset
by pressing the answer/end button of the
headset.
Voice command and voice dial
You can also use your Bluetooth headset for a direct access to several functions
(voice dial and voice commands) by saying the associated word. To configure
the voice tag for each wanted function, see “Voice dial” page 15.
You can also associate the Voice command to the functions supported by the
Hotkeys (see “Hotkeys” page 30).
(voice dial and voice commands) by saying the associated word. To configure
the voice tag for each wanted function, see “Voice dial” page 15.
You can also associate the Voice command to the functions supported by the
Hotkeys (see “Hotkeys” page 30).
L
In case of a
Redial
or a
Reply
voice command, launch the voice command, and
press the headset key to activate the audio link.
Pair and use a PC or PDA
Pairing process
A PC or PDA must also be paired with your mobile phone via the
Settings
>
Bluetooth setting
>
Discoverable
submenu.
L
You must turn on both devices before running the pairing process. In this mode,
your mobile phone is detected by the PC or the PDA, from which you must launch
the pairing process which should take place within 1mn50s.
your mobile phone is detected by the PC or the PDA, from which you must launch
the pairing process which should take place within 1mn50s.
The pairing process will take place on both the mobile and the external device,
and the same pairing code must be entered on both devices. If not supplied
with your Bluetooth device or card, you can enter the code of your choice.
and the same pairing code must be entered on both devices. If not supplied
with your Bluetooth device or card, you can enter the code of your choice.
L
A pairing code (16 characters max.), allows the mobile to identify and
differentiate several devices from one another.
differentiate several devices from one another.
Move to headset
Move to phone
Fisio820_GB_4311 255 51342.book Page 70 Mardi, 18. juin 2002 2:28 14