Philips dvd580hc-001 Manual Do Utilizador
14
English
NTSC/PAL Conversion
● This player is equipped with an NTSC/PAL
conversion feature that converts the video
output of the disc to match your TV system.
output of the disc to match your TV system.
● Allows you to select between PAL, NTSC and
MULTI mode.
The conversions supported are as follows:
The conversions supported are as follows:
NTSC
PAL
NTSC
Not
Supported
PAL
PAL
NTSC
PAL
NTSC
NTSC
PAL
PAL
Disc
Output format
Type
DVD
VCD
NTSC
Format
Selected mode
PAL
NTSC
PAL
NTSC
PAL
AUTO
1
Press VIDEO SYS on the remote control to
access the preference video standard.
access the preference video standard.
Notes:
– If you have a PAL only TV, ensure that your
PAL/NTSC setting is PAL.
– MULTI can only be selected when using a TV
that has both the NTSC and PAL systems.
– This setting is applicable for CVBS output on
cinch and SCART only.
– Slight picture distortions may occur due to this
conversion. This is normal. Thus, the MULTI format
is most suitable for the best picture quality.
– If you have a PAL only TV, ensure that your
PAL/NTSC setting is PAL.
– MULTI can only be selected when using a TV
that has both the NTSC and PAL systems.
– This setting is applicable for CVBS output on
cinch and SCART only.
– Slight picture distortions may occur due to this
conversion. This is normal. Thus, the MULTI format
is most suitable for the best picture quality.
Switching On
1
Connect the AC power cord to the power
outlet.
outlet.
2
Switch on the TV and DVD player.
3
Set the TV to the correct Video IN channel. (eg.
EXT1, EXT2, AV1, AV2, AUDIO/VIDEO, etc.
(Refer to your TV owner’s manual for detail)
➜ The player display lights up and the default
screen appears on the TV.
EXT1, EXT2, AV1, AV2, AUDIO/VIDEO, etc.
(Refer to your TV owner’s manual for detail)
➜ The player display lights up and the default
screen appears on the TV.
4
If you are using an external equipment (eg. audio
system or receiver), turn them on and select the
appropriate input source that was used to
connect to the DVD player output. Refer to the
equipment owner’s manual for detail.
system or receiver), turn them on and select the
appropriate input source that was used to
connect to the DVD player output. Refer to the
equipment owner’s manual for detail.
COAXIAL
OPTICAL
VIDEO
S-VIDEO
12V
FL
SL
Center
FR
SR
Sub-W
Multi-5.1
TV OUT
AC
MAINS
AC power cord
12V ADAPTOR
5
If you want to see the On Screen Display in your
preferred language, press the System Menu
button and with the arrow keys and OK go to
GENERAL SETUP then OSD LANG to select
the desired language.
preferred language, press the System Menu
button and with the arrow keys and OK go to
GENERAL SETUP then OSD LANG to select
the desired language.
Preparation