Philips dvp3042 Manual Do Utilizador

Página de 43
E
ng
li
sh
41
 Problem 
Solution
Troubleshooting 
(continued)
Not able to select some items in the 
setup/system menu.
The DVD player does not start 
playback.
Picture freezes momentarily during 
playback.
Unable to select Progressive Scan on/
off.
Unable to play DivX movies.
No sound during DivX movies 
playback.
An DivX movies does not repeat.
–  Press STOP button twice before selecting the setup/system 
menu.
–  Depending on the disc availability, some menu items cannot 
be selected.
–  Insert a readable disc with the playback side facing down.
–  Check the disc type, color system (PAL/NTSC) and region 
code.
–  Check for any scratches or smudges on the disc.
–  Press SETUP to turn off the setup menu screen.
–  You may need to enter the password in order to change the 
parental rating level or to unlock the disc for playback.
–  Moisture may have condensed inside the system. Remove the 
disc and leave the system turned on for about an hour.
–  Disconnect the power cord from the power outlet for a few 
minutes. Reconnect the power cord and try to operate again 
as usual.
–  Check the disc for fi ngerprint/scratches and clean with a soft 
cloth wiping from center to edge.
–  Check that the output of the video signal is turn to 
{ YPbPr }.
–  Check that the DivX fi le is encoded in ‘Home Theatre’ mode 
with DivX 5.x encoder.
–  Check that the DivX movie downloaded is a complete fi le.
–  The audio codec may not be supported by this DVD player.
– Check 
that 
fi le size of the movie does not exceed the fi le size 
of the disc during downloading.
Need Help? Visit us at www.philips.com/support
01-43_dvp3040_37_eng2.indd   41
01-43_dvp3040_37_eng2.indd   41
2006-07-14   3:35:43 PM
2006-07-14   3:35:43 PM