Philips dvp640k Manual Do Utilizador

8239 300 30402

13

This DVD Player is compatible with both
NTSC and PAL. In order for a DVD disc
to play on this Player, the colour system of
the Disc, the TV and the DVD Player
should match.

1

Press SYSTEM MENU.

2

Press 4 3 to select ‘Video Setup Page’.

3

Enter its submenu by pressing OK.

4

Use the 1 2 3 4 keys on the Remote
Control to navigate in the menu.

- - VIDEO SETUP PAGE - -

TV STANDARD

TV DISPLAY

CLOSED CAPTIONS

VIDEO OUTPUT
PROGRESSIVE

SMART PICTURE

MULTI

NTSC

PAL

MAIN PAGE

If the progressive function is activated, but
your TV does not support progressive
function or YPbPr cable is not connected
accordingly, there will be a blank screen.
You can deactivated progressive function
as below:

1

Press STANDBY ON on the front panel
to switch on the DVD player.

2

Press OPEN/CLOSE on the front panel
to open the disc tray.

3

Press numerical key pad ‘1’.

➜

The blue Philips DVD background

appears on the TV screen.

Move to ‘TV Standard’ and press B.

PAL – Select this if the connected TV is
PAL system. It will change the video signal
of a NTSC disc and output in PAL format.

NTSC – Select this if the connected TV
is NTSC system. It will change the video
signal of a PAL disc (VCD only) and
output in NTSC format.

Multi – Select this if the connected TV is
compatible with both NTSC and PAL
(multi-system).  The output format will be
in accordance with the video signal of the
disc.

- - REFER TO THE OWNER'S MANUAL - -

Changing MULTI to PAL
1. Ensure your TV supports PAL
2. If there is a blank screen on normal TV
    wait 15 seconds for auto recover

CANCEL

OK

1 2  - Move                  OK - Select

- - REFER TO THE OWNER'S MANUAL - -

Confirm again to use PAL
If picture is good, press OK button on remote control

CANCEL

OK

1 2  - Move                  OK - Select

TO GO BACK TO MULTI
1. Open tray,
2.  Press '3' Key 

.

To exit from the menu
Press SYSTEM MENU.

01-40 DVP640K_751

7/04/2004, 4:49 PM

13