Directed Electronics rk20 Manual Do Utilizador

Feature descriptions

The features of the system are described below. Default settings are in bold. The

numbers in parentheses indicate the number of times the Status LED flashes.

➤

Menu 1

1-1 Horn Honk Pulses OFF: (1) No audible confirmation on Lock or Unlock.

(2) 20ms horn honk, (3) 30ms horn honk, (4) 40ms horn honk, (5) 50ms horn

honk

1-2 Ignition Locks OFF/ON : (2) When turned on Locks the doors three seconds

after the ignition is turned On and the vehicles doors are closed. (1) When

turned Off the system does not lock the doors when the ignition is turned on.

1-3 Ignition Unlocks OFF: (2) Unlock: When turned On Unlocks the doors when

the ignition is turned off. (1) When turned Off the system does not unlock the

doors when the ignition is turned off.

1-4 0.8 sec Door Lock Pulse (1)Duration: The default setting is 0.8 second door

lock pulses. Some European vehicles, such as Mercedes-Benz and Audi, require

longer lock and unlock pulses to operate the vacuum pump. Programming the

system to provide 3.5 second (2) pulses, accommodates the door lock interface

in these vehicles. (See door lock connections section for wiring information re-

garding Type E door locks interfacing. The 0.4 second (3) pulse is required on

some vehicles where the lock wires can also control the windows and the 0.8

second pulse causes the windows to open/close when locking or unlocking.

1-5 Single Pulse Unlock (1): The system sends out a single pulse when unlock-

ing. (2) Double-pulse unlock sends out 2 pulses when unlocking.

1-6 Single Pulse Lock (1): The system sends out a single pulse when locking. (2)

Double-pulse lock sends out 2 pulses when locking.