Philips hp6322 Manual Do Utilizador
ENGLISH
Introduction
.
With your new Philips ladyshave Softselect you can
quickly, easily and comfortably remove unwanted hair
from dry or wet skin.
quickly, easily and comfortably remove unwanted hair
from dry or wet skin.
This Philips ladyshave Softselect is equipped with an
adjustable shaving foil with three different zones for
shaving the underarms, bikini line and legs.
adjustable shaving foil with three different zones for
shaving the underarms, bikini line and legs.
◗
You can use the ladyshave either dry or wet. If you
shave while taking a bath or shower, we advise you
to use soap or shaving foam for the most
comfortable shave. After use you can simply rinse
the ladyshave in the shower or under the tap. Make
sure the battery compartment is properly closed
during wet use and when cleaning the appliance.
shave while taking a bath or shower, we advise you
to use soap or shaving foam for the most
comfortable shave. After use you can simply rinse
the ladyshave in the shower or under the tap. Make
sure the battery compartment is properly closed
during wet use and when cleaning the appliance.
◗
This ladyshave can only be operated on batteries.
General description
.
A
Shaving foil
B
Softselect slide
C
On/off switch
D
Battery compartment
E
Cleaning brush
F
Comb attachment
Important
.
Read these instructions for use carefully before using the
appliance and save them for future reference.
appliance and save them for future reference.
◗
This appliance complies with the internationally
approved IEC safety regulations and can be safely
used in the bath or shower (fig. 1).
approved IEC safety regulations and can be safely
used in the bath or shower (fig. 1).
◗
Do not use or clean the appliance with water that is
hotter than shower temperature.
hotter than shower temperature.
◗
Use and store the appliance at a temperature
between 15cC and 35cC.
between 15cC and 35cC.
◗
Keep the appliance out of the reach of children.
◗
This appliance is only intended for shaving and
trimming human hair. Do not use it for any other
purpose.
trimming human hair. Do not use it for any other
purpose.
◗
To keep the ladyshave waterproof, make sure that
the rubber sealing ring of the battery compartment
stays clean and undamaged. Apply some vaseline to
the rubber sealing ring from time to time.
the rubber sealing ring of the battery compartment
stays clean and undamaged. Apply some vaseline to
the rubber sealing ring from time to time.
Preparing for use
.
The ladyshave runs on two R6 AA 1.5-volt batteries. We
strongly advise you to use Philips LR6 PowerLife
batteries. They supply sufficient energy for approx. 40
minutes of shaving.
strongly advise you to use Philips LR6 PowerLife
batteries. They supply sufficient energy for approx. 40
minutes of shaving.
1
Pull the battery compartment downwards with
some force to remove it (fig. 2).
some force to remove it (fig. 2).
2
Put the batteries in the battery compartment (fig. 3).
Make sure your hands and the appliance are dry when
inserting the batteries.
inserting the batteries.
◗
Make sure the + and - poles of the batteries are
pointing in the right direction
pointing in the right direction
3
Reattach the battery compartment to the appliance.
To avoid damage due to battery leakage:
-
-
Remove the batteries if the appliance is not going to
be used for a month or more.
be used for a month or more.
-
Do not leave empty batteries in the appliance.
Using the appliance
.
Shaving
1
Set the softselect slide on the shaving head to the
position that corresponds to the body part you
wish to shave (fig. 4).
position that corresponds to the body part you
wish to shave (fig. 4).
◗
Use the golden zone of the shaving foil for shaving
the underarms (fig. 5).
the underarms (fig. 5).
◗
Use the gold-striped zone of the shaving foil for
shaving the bikini line (fig. 6).
shaving the bikini line (fig. 6).
◗
Use the silver zone of the shaving foil for shaving
the legs (fig. 7).
the legs (fig. 7).
2
Switch the ladyshave on (fig. 8).
3
Place the trimmers and the shaving foil gently on
the skin and move the ladyshave slowly over the
skin against the direction of hair growth while
pressing it lightly (fig. 9).
the skin and move the ladyshave slowly over the
skin against the direction of hair growth while
pressing it lightly (fig. 9).
Make sure that both trimmers and the shaving foil are
always completely in contact with the skin.
always completely in contact with the skin.
◗
The angle between the skin and the ladyshave
should be 70c to get the best results.
should be 70c to get the best results.
◗
Thanks to the Aloe Vera Glider, the appliance glides
over the skin more easily and thus guarantees a
smooth shave while reducing the risk of skin
irritation (fig. 10).
over the skin more easily and thus guarantees a
smooth shave while reducing the risk of skin
irritation (fig. 10).
Trimming
1
To trim the bikini area, place the comb attachment
on the shaving head with the recess of the
attachment on the front of the appliance (fig. 11).
on the shaving head with the recess of the
attachment on the front of the appliance (fig. 11).
2
To trim the underarms, place the comb attachment
on the shaving head with the recess of the
attachment on the back of the appliance (fig. 12).
on the shaving head with the recess of the
attachment on the back of the appliance (fig. 12).
3
Switch the ladyshave on (fig. 8).
4
Move the appliance against the direction of hair
growth (fig. 13).
growth (fig. 13).
◗
Make sure the surface of the comb always stays in
contact with the skin.
contact with the skin.
Cleaning and maintenance
.
Do not use any corrosive detergents, scouring pads or
cloths, petrol, acetone etc. to clean the appliance.
cloths, petrol, acetone etc. to clean the appliance.
After every use
Clean the ladyshave every time you have used it.
1
Switch the appliance off.
2
Remove the shaving head (fig. 14).
Do not exert any pressure on the shaving foil to avoid
damage.
damage.
3
Brush the hairs off the cutter block and the shaving
head. Make sure you also brush away any hairs that
have collected under the trimmers (fig. 15).
head. Make sure you also brush away any hairs that
have collected under the trimmers (fig. 15).
4
For extra thorough cleaning, you can also rinse the
appliance under the tap or in the shower (fig. 16).
appliance under the tap or in the shower (fig. 16).
5
Always put the comb attachment on the shaving
head to avoid damage to the foil.
head to avoid damage to the foil.
Twice a year
◗
Lubricate the shaving foil and the trimmers with a
drop of sewing machine oil twice a year (fig. 17).
drop of sewing machine oil twice a year (fig. 17).
Replacement
.
If you use the ladyshave two or more times a week, we
advise you to replace the shaving foil and cutter block
every two years.
-
advise you to replace the shaving foil and cutter block
every two years.
-
The shaving foil may only be replaced with an original
Philips shaving foil (type HP6120).
Philips shaving foil (type HP6120).
-
The cutter block may only be replaced with an
original Philips cutter block (type HP2909).
original Philips cutter block (type HP2909).
-
If one or both trimmers are damaged or worn,
contact your Philips dealer or a Philips service centre
for replacement.
contact your Philips dealer or a Philips service centre
for replacement.
To replace the shaving foil:
1
Remove the shaving head (fig. 14).
2
Press the sides of the shaving head slightly together
and remove the foil (fig. 18).
and remove the foil (fig. 18).
3
Make sure the softselect slide is in the middle
position (bikini line) when you insert the new foil
(fig. 19).
position (bikini line) when you insert the new foil
(fig. 19).
4
Press the sides of the shaving head slightly together
and insert the new foil (fig. 20).
and insert the new foil (fig. 20).
5
Note that the three pivots should snap into the
corresponding holes (fig. 21).
corresponding holes (fig. 21).
To replace the cutter block:
6
Pull it off the appliance with some force (fig. 22).
7
Place a new cutter block on the appliance and push
it home ('click') (fig. 23).
it home ('click') (fig. 23).
Environment
.
◗
Do not throw the appliance away with the normal
household waste at the end of its life, but hand it in
at an official collection point for recycling. By doing
this you will help to preserve the environment
(fig. 24).
household waste at the end of its life, but hand it in
at an official collection point for recycling. By doing
this you will help to preserve the environment
(fig. 24).
◗
Batteries contain substances that may pollute the
environment. Always remove the batteries before
discarding the appliance and handing it in at an
official collection point. Dispose of the batteries at
an official collection point for batteries.
environment. Always remove the batteries before
discarding the appliance and handing it in at an
official collection point. Dispose of the batteries at
an official collection point for batteries.
1
Make sure the batteries are completely empty when
you dispose of them.
you dispose of them.
Guarantee & service
.
If you need information or if you have a problem, please
visit the Philips website at www.philips.com or contact
the Philips Customer Care Centre in your country (you
will find its phone number in the worldwide guarantee
leaflet). If there is no Customer Care Centre in your
country, turn to your local Philips dealer or contact the
Service Department of Philips Domestic Appliances and
Personal Care BV.
visit the Philips website at www.philips.com or contact
the Philips Customer Care Centre in your country (you
will find its phone number in the worldwide guarantee
leaflet). If there is no Customer Care Centre in your
country, turn to your local Philips dealer or contact the
Service Department of Philips Domestic Appliances and
Personal Care BV.
Solution
Clean the shaving
head (see chapter
'Cleaning and
maintenance').
head (see chapter
'Cleaning and
maintenance').
Lubricate the shaving
foil and the trimmers
with a drop of sewing
machine oil.
foil and the trimmers
with a drop of sewing
machine oil.
Replace the battery
(see chapter
'Preparing for use').
(see chapter
'Preparing for use').
Make sure that you
move the appliance
against the direction
of hair growth.
move the appliance
against the direction
of hair growth.
Remove the comb
attachment and
reattach it until it
snaps home ('click').
attachment and
reattach it until it
snaps home ('click').
Make sure that the
entire surface of the
comb attachment
always stays in
contact with the skin.
entire surface of the
comb attachment
always stays in
contact with the skin.
Clean the cutter
block with the brush
supplied and make
sure that no hairs are
stuck under the
trimmers.
block with the brush
supplied and make
sure that no hairs are
stuck under the
trimmers.
Replace the shaving
foil (see chapter
'Replacement').
foil (see chapter
'Replacement').
Check if the softselect
slide has been set to
the position that
corresponds to the
body part you wish to
shave.
slide has been set to
the position that
corresponds to the
body part you wish to
shave.
Replace the battery
(see chapter
'Preparing for use').
(see chapter
'Preparing for use').
Cause
The shaving head is
dirty
dirty
The shaving head is
too dry.
too dry.
The battery is running
low.
low.
The appliance is being
used in the wrong
way.
used in the wrong
way.
The comb
attachment has not
been attached
properly.
attachment has not
been attached
properly.
The comb
attachment does not
touch the skin
properly during
trimming.
attachment does not
touch the skin
properly during
trimming.
Long hairs are
obstructing the
shaving head.
obstructing the
shaving head.
The shaving foil is
damaged or worn.
damaged or worn.
The softselect slide is
in the wrong position.
in the wrong position.
The battery is empty.
Problem
Reduced
shaving or
trimming
performance
shaving or
trimming
performance
Stronger skin
irritation than
usual.
irritation than
usual.
The appliance
does not work.
does not work.
Troubleshooting
If the appliance does not work or does not work
properly, first check the list below. If the problem is not
mentioned in this list, the appliance probably has a defect.
In that case we advise you to take the appliance to your
dealer or to an authorised Philips service centre.
properly, first check the list below. If the problem is not
mentioned in this list, the appliance probably has a defect.
In that case we advise you to take the appliance to your
dealer or to an authorised Philips service centre.
4203 000 32761
2/10