Philips hr8903 Manual Do Utilizador

Página de 48
4
English
• To enable recycling, the plastics of
the product have been coded.
• The cardboard packaging has
been made of recycled material
and is entirely suitable for recycling.
Important
• Before using for the first time, check if
the dustbag is placed correctly.
• Never suck up water (or any other
liquid). Never pick up ashes until they
are cold.
• When picking up fine dust, the pores of
the dustbag may become clogged. This
will obstruct the air passage.
Subsequently, the dustbag needs
replacement, although the bag might be
far from full.
• Only use this vacuum cleaner with the
original paper dustbags type Philips
Oslo+ or Oslo+ Hygiene (closeable).
• Never use the vacuum cleaner without
the Active Carbon filter and/or the
dustbag!
f
Getting the vacuum cleaner ready for use:
• Connecting the hose: press firmly ("Click!")
(fig. 1). 
- To disconnect: press the knob (1) and pull (2)
the hose out of the vacuum cleaner (fig. 2).
• Connecting the nozzle, the (telescopic) tube
and the handle: insert the narrowed section
into the wider section while rotating a little
(fig. 3). 
To disconnect: pull while rotating.
• To adjust the telescopic tube to the
required length: grasp the plastic ring and pull
out the upper tube as far as necessary (fig. 4).
Lock the telescopic tube in position by
releasing the plastic ring.
• Nozzles:
- Combi nozzle. This nozzle is convertible for
use on either carpets (without brush, fig. 5) or
hard floors (with brush, fig. 6);
-  Small nozzle, brush nozzle and crevice
nozzle. 
These can be found in the special
storage compartment (fig. 7-11);
• Pull the mains plug out of the vacuum cleaner
(fig. 12) and insert into the wall socket.
• Press the on/off switch (
I
) (fig. 13). 
• The electronic suction power control on the
vacuum cleaner enables smooth suction
power adjustment (fig. 14).
Medium suction power is advisable for
general use.
Minimum suction power is advisable for
dusting using the brush nozzle and for cleaning
curtains, cloths, etc. 
Maximum suction power is advisable for
cleaning very dirty carpets and hard floors.
• The suction power control at the hand grip
enables you to reduce suction power (fig. 15).
This extra facility is advisable if you wish to
apply lower suction power for a short period.
Insufficient suction power?
Please check:
- if the slide on the vacuum cleaner is in the
required position;
- if the control at the hand grip is in "open"
position;
- if the dustbag is full;
- if the nozzle, tube or hose is blocked up. 
To remove the obstruction, disconnect the
blocked-up item and connect it (as far as
possible) in adverse position. Then the air will
stream through the item in opposite direction. 
Active Carbon filter
The active carbon in this filter absorbs
unpleasant smells. The two
electrostatically charged filter layers
guarantee that the exhaust air is perfectly
clean.
S-Class filter
The S-Class filter is capable of removing
from the outlet air at least 99.97% of all
the particles measuring 0.0003 mm and
more.
This includes not only normal domestic
dust, but also harmful microscopic vermin
such as glycyphagii and their excrements. 
These are known as causes of bronchial
allergies.