Philips MCM11 Manual Do Utilizador

16

You can start the automatic presetting from a
selected preset number.

1

In tuner mode, press í or ë (

S 

or

T 

on the main set)

 to select a preset

number.

2

Press and hold PROGRAM until "

AUTO"

appears.

➜

If a radio station is stored in one of the

presets, the same radio station will not store
under another preset number.

➜

If no preset number is selected, automatic

preset will begin from preset (1) and all your
former presets will be overridden.

You can choose to store only the favourite radio
stations.

1

Tune to your desired radio station (refer to
“Tuning to radio stations”).

2

Press PROGRAM.

➜

The preset number starts flashing. If you want

to store the radio station in another preset
number, press í or ë (

S 

or 

T 

on the

main set).

3

Press PROGRAM again to store.

●

Repeat steps 1~3 to store other radio
stations.

●

In tuner mode, press í or ë (

S 

or 

T

on the main set).

➜

The preset number, radio frequency, and

waveband will appear.

●

Press and hold Çuntil “

PRESET DELETED”

appears.

➜

The current preset radio station will be

deleted.

➜

All other preset radio stations with higher

numbers are decreased by one.

all versions)
In North and South America, the frequency step
between adjacent channels in the MW band is
10 kHz (9 kHz in some areas).  The preset
frequency step in the factory is 9 kHz.

LOGIC DECK

IR

➠

➠

➠

➠

1

Disconnect the system from the AC power
supply (pull out the AC power cord).

2

While holding down TUNER and T on
the main unit, reconnect the system to the
AC power supply.

➜

The display will show "

GRID 9" or

"

GRID 10".

001-022-MCM9-11-21-Eng

3/17/05, 11:03

16