Philips WAC3500D Manual Do Utilizador
8
FM radio
8.1
Tune radio stations
Connect the supplied FM wire antenna to Center (see 3 Installation).
Ensure that Center is switched on or in Standby mode (see 5 Basic functions).
Press
HOME
Press the navigation controls
3
or
4
and
2
to select Radio > FM Tuner.
>
Playback screen appears.
Display: Radio, radio station frequency and preset number (if programmed).
Display: Radio, radio station frequency and preset number (if programmed).
Press & hold
3
or
4
until frequency in display starts running.
>
The radio automatically tunes to a station of sufficient reception.
Display during automatic tuning: Searching...
If a station is received in stereo,
Display during automatic tuning: Searching...
If a station is received in stereo,
is shown.
When you are receiving an RDS station,
is shown.
Repeat tuning process until you find the desired radio station.
To tune to a weak station, press
3
or
4
briefly and repeatedly until you have established
optimum reception.
8.2
Store preset radio stations
You can store up to 60 radio stations in the preset memory.
8.2.1
Autostore: Automatic preset program
Autostore automatically starts programming radio stations into the preset memory, beginning with
Preset 1. Available stations are programmed in the order of their radio frequency, RDS stations are
followed by FM stations. A maximum of 10 RDS stations will be stored (Preset 01 to Preset 10).
Preset 1. Available stations are programmed in the order of their radio frequency, RDS stations are
followed by FM stations. A maximum of 10 RDS stations will be stored (Preset 01 to Preset 10).
Press
MENU
to enter the menu screen.
Use
3
or
4
and
2
to select autostore radio.
>
Display: Autostore, please wait… Press 'Stop' to exit.
When all stations are stored, the first preset station automatically starts playing.
2
1
7
6
5
4
3
2
1
FM radio
48