Capresso f9 Guia Do Utilizador

The frothXpress PLUS
is separately available 
for the F9.This system
siphons milk and 
automatically produces
preprogrammed
amounts of hot frothed
or hot steamed milk 
right into your cups, 
never wasting any milk! 
1. Disconnect the Dual-
Frother PLUS from the 
steam nozzle (turn to 
loosen and pull down

to remove). 

2. Fill milk container with milk and assemble milk container 

(see above). Attach the frothXpress to the steam nozzle.  
Attach the milk container to the frothXpress (see above). 
Important: Make sure all parts are connected tightly, other
wise siphoning does not work.

3. Set the dial to the (–) minus sign (12 o’clock) of the frothing

range for cappuccino or to the (–) minus sign (6 o’clock) 
of the steaming range for latte.

4. Place cup underneath the frother.
5. Push the STEAM button. The button’s red light starts 

blinking. 

. After ~ 20 sec.: 

.

6. Push the STEAM button again. 

. The F9 

will create hot frothed or steamed milk right in your cup . 

When you have enough milk in your cup push the STEAM
button to stop.

7. If you like more frothed milk push the STEAM button again.
8. For hotter milk in either position move the dial more

towards the (+) plus symbols.

(The extra long hose lets you siphon milk from any carton 
without using the special milk container.)
Tip: Use Chocolate milk to make great Hot Chocolate!

P) Cleaning the frothXpress PLUS system
Should be done right after use, takes less than 30 seconds.
• Store the milk container in the refrigerator and remove the 

frothXpress from the steam nozzle.

• Drop the hose and the frothXpress in a cup of hot water. 

This will push out any milk residue and prevents milk from 
hardening inside the system.

• Place a cup underneath the steam nozzle and push the 

HOT WATER button for three seconds. 

• Replace frothXpress system.

1

2

3

frothXpress

Plus

attached

Milk

Container
Assembly

Frothing

range

Steaming

range

Steam only

no

siphoning

DIAL

+

+

_

_