CMS Products 676 Manual Do Utilizador

HotCup Operators’ Guide

Hot Drink Setup

November, 2007

6740001

VIEW OR SET THE HOT WATER TANK TEMPERATURE

a. Press

then

until the display shows

SET 202

. In this example, 202° is the

water tank temperature setpoint in degrees Fahrenheit. If a decimal point appears next to the
“F”, the heater is on.

b. If desired, enter a new setpoint in the accepted range of 149° - 205° F (65° - 96° C).

NOTE

The lower limit for vending is 20° below setpoint, up to a

maximum of 180° F (82° C).

c. To change display units (replace the “F” with a “C” for Celsius), press

d. Continue.

SET UP LOW TEMPERATURE DISPENSING

a. Press

then press

until the screen displays either:

LTDIS off

. This causes the machine to operate the same as the previous HotCup Center.

For example, with a setpoint temperature of 202º F the machine will inhibit vending when the
water tank temperature reaches 182º F.

-or-

ltdis on

. Allows vending to a water tank temperature of 140º F.

b. Press

to change between ON and OFF.

c. Continue.