Manualsbrain.com
  1. Manuais
  2. Marcas
  3. Metrologic Instruments
  4. stratoss ms2220
  5. Manual Do Utilizador

Metrologic Instruments stratoss ms2220 Manual Do Utilizador

Download
Página de 88
 
 
40 
S
CANNER 
O
PERATION
 
 
S
TARTUP  
 
When the scanner first receives power the white LED will flash, the blue LED will turn on and the scanner will beep once (the 
white LED will remain on for the duration of the beep).  The scanner is now ready to scan. 
 
 
 
 
P
OWER
-U
P 
T
EST 
M
ODE  
 
When a StratosS scanner is first powered up, it cycles through a number of self-tests before starting normal operation.  If there 
are any initial failures during this sequence of tests the scanner will beep or razz to indicate the error and an error code will 
appear in the diagnostic indicator display.  
 
The following are examples of the types of tests performed at power-up. 
 
1. Memory 
tests 
2.  Hardware setup tests 
3. Motor 
tests 
4. Laser 
tests 
5. Configuration 
tests 
6. Interface 
tests 
7. Scale 
tests 
 
These tests are also performed on a periodic basis with the operator alerted to any failures. 
 
 
 
 
 
C
ONFIGURATION 
M
ODE  
 
All MS2220 series scanners have been configured at the factory with a set of default communication protocols.  Since many 
host systems have unique formats and protocol requirements, Metrologic provides a wide range of configurable features that 
may be selected with the use of the MetroSelect
®
 Configuration Guide (
MLPN
 00-02407
x), the MS2xxx Stratos Series 
Configuration Addendum (
MLPN
 00-02034
x) and MetroSet. 
 
For a complete list of the factory default settings, refer to the Default Settings section of this guide.